概要

説明

This fully featured hot swap power controller targets +12V applications. The ISL6115A with its integrated charge pump has a higher (6. 5V vs 5V) gate drive than its sister part the ISL6115 making this part an immediate efficiency improvement replacement. This IC features programmable overcurrent (OC) detection, current regulation (CR) with time delay to latch-off and soft-start. The current regulation level is set by 2 external resistors; RISET sets the CR Vth and the other is a low ohmic sense resistor across, which the CR Vth is developed. The CR duration is set by an external capacitor on the CTIM pin, which is charged with a 20µA current once the CR Vth level is reached. The IC then quickly pulls down the GATE output latching off the pass FET.

特長

  • HOT SWAP Single Power Distribution Control for +12V
  • Overcurrent Fault Isolation
  • Programmable Current Regulation Level
  • Programmable Current Regulation Time to Latch-Off
  • Rail-to-Rail Common Mode Input Voltage Range
  • Enhanced Internal Charge Pump Drives N-Channel MOSFET gate to 6.5V above IC bias.
  • Undervoltage and Overcurrent Latch Indicators
  • Adjustable Turn-On Ramp
  • Protection During Turn-On
  • Two Levels of Overcurrent Detection Provide Fast Response to Varying Fault Conditions
  • 1µs Response Time to Dead Short
  • Pb-Free (RoHS Compliant)

製品比較

アプリケーション

アプリケーション

  • Power Distribution Control
  • Hot Plug Components and Circuitry

ドキュメント

分類 タイトル 日付
データシート PDF 508 KB
ホワイトペーパー PDF 295 KB
製品変更通知 PDF 152 KB
その他資料 PDF 2.20 MB
アプリケーションノート PDF 509 KB
アプリケーションノート PDF 397 KB
6 items

設計・開発

ボード&キット

ボード&キット

モデル