The HI-506/HI-507 and HI-508/HI-509 monolithic CMOS multiplexers each include an array of sixteen and eight analog switches respectively, a digital decoder circuit for channel selection, voltage reference for logic thresholds, and an enable input for device selection when several multiplexers are present. The Dielectric Isolation (DI) process used in fabrication of these devices eliminates the problem of latchup. DI also offers much lower substrate leakage and parasitic capacitance than conventional junction isolated CMOS (see Application Note AN520). The switching threshold for each digital input is established by an internal +5V reference, providing a guaranteed minimum 2. 4V for logic 1 and maximum 0. 8V for logic 0. This allows direct interface without pullup resistors to signals from most logic families: CMOS, TTL, DTL and some PMOS. For protection against transient overvoltage, the digital inputs include a series 200Ω resistor and diode clamp to each supply. The HI-506 is a single 16-channel, the HI-507 is an 8-channel differential, the HI-508 is a single 8-channel and the HI-509 is a 4-channel differential multiplexer. If input overvoltages are present, the HI-546/HI-547/HI-548/ HI-549 multiplexers are recommended.

特長

  • Pb-Free Available (RoHS Compliant) (See Ordering Info)
  • Low ON Resistance 180Ω
  • Wide Analog Signal Range ±15V
  • TTL/CMOS Compatible
  • Access Time 250ns
  • Maximum Power Supply 44V
  • Break-Before-Make Switching
  • No Latch-Up
  • Replaces DG506A/DG506AA and DG507A/DG507AA
  • Replaces DG508A/DG508AA and DG509A/DG509AA
  • Pb-Free Available (RoHS Compliant)

アプリケーション

  • Data Acquisition Systems
  • Precision Instrumentation
  • Demultiplexing
  • Selector Switch

製品選択

製品名 Part Status Pkg. Type Carrier Type MOQ 購入/サンプル
Active CERDIP Tube 250
Availability

ドキュメント

タイトル language 分類 形式 サイズ 日付
データシート
HI-506, HI-507, HI-508, HI-509 Datasheet データシート PDF 1013 KB
アプリケーションノート、ホワイトペーパー
AN557: Recommended Test Procedures for Analog Switches アプリケーションノート PDF 468 KB
AN9867: End of Life Derating: A Necessity or Overkill アプリケーションノート PDF 338 KB
AN1032: Analog Multiplexers and Overvoltage Protection アプリケーションノート PDF 195 KB
AN1033: Multiplexered Data Acquisition System Considerations アプリケーションノート PDF 302 KB
AN1034: CMOS Analog Multiplexers and Switches, Applications Considerations アプリケーションノート PDF 300 KB
AN520: CMOS Analog Multiplexers and Switches; Specifications and Application Considerations アプリケーションノート PDF 270 KB
PCN / PDN
PCN12087 - PLCC w/ Gold Bond Wire from ANST to ATP as Alternate Assembly Site 製品変更通知 PDF 86 KB
PCN11039 - Manufacturing Site Change for Assembly of Intersil Ceramic Dual-In-Line (Frit Seal Cerdip) Products - Amkor (ATP) Muntinlupa City, Philippines 製品変更通知 PDF 147 KB
その他資料
Intersil Space Products Brochure カタログ PDF 3.14 MB
Intersil Commercial Lab Services カタログ PDF 364 KB
PA14064 - Minimum Line Quantity Change Product Advisory PDF 282 KB
PLC16037 - Product Discontinuance / Obsolescence Notification Products Product Life Cycle Notice PDF 226 KB