ISL8115EVAL1Z, ISL8115EVAL2Z

Synchronous Buck Converter Evaluation Boards

Description

The ISL8115EVAL1Z is a synchronous buck converter implementing Intersil's wide input range PWM controller ISL8115. Utilizing voltage mode control with input feed-forward, the ISL8115EVAL1Z maintains a constant loop gain for optimal transient response, especially for applications with a wide input voltage range.

ISL8115EVAL2Z is a Synchronous Buck Converter implementing Intersil's wide input range PWM controller ISL8115. Utilizing voltage mode control with input feed forward, the ISL8115EVAL2Z maintains a constant loop gain for optimal transient response, especially for applications with a wide input voltage range.

Key Features

  • Wide VIN range operation: 2.97V to 36V; up to 5.5V output and 30A load current per phase
  • Fast transient response
    • Voltage-mode PWM leading-edge modulation with non-linear control
    • Input voltage feed-forward
  • Integrated 5V high speed 4A MOSFET gate drivers
    • Internal bootstrap diode
  • Oscillator programmable from 150kHz to 1.5MHz
    • Frequency synchronization to external clock signal
  • Diode emulation mode for light load efficiency improvement
  • Output OVP/UVP; OCP and OTP
  • Power-good open drain output
  • Adjustable soft-start
  • Pre-bias start-up function
  • Excellent output voltage regulation
    • 0.6V ±1.0% internal reference (-40°C~125°C)
    • 0.6V ±0.7% internal reference (-40°C~105°C)
    • Differential voltage sensing

Applications

  • Power supply for datacom/telecom and POL
  • Wide input voltage range buck regulators
  • High current density power supplies RF power amplifier bias compensation

ISL8115EVAL2Z Synchronous Buck Converter Evaluation Board

ISL8115EVAL2Z Synchronous Buck Converter Evaluation Board

ISL8115EVAL1Z Synchronous Buck Converter Evaluation Board

ISL8115EVAL1Z Synchronous Buck Converter Evaluation Board

 

Related Products

ISL8115

Tool Information

No data found.

No product that matches the specified status or spec was found.
Please contact Renesas Electronics support

Disclaimer: THIS MATERIAL IS PROVIDED “AS-IS” FOR EVALUATION PURPOSES ONLY. RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (collectively, “Renesas”) DISCLAIM ALL WARRANTIES, INCLUDING WITHOUT LIMITATION, FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. Renesas provides evaluation platforms and design proposals to help our customers to develop products. However, factors beyond Renesas' control, including without limitation, component variations, temperature changes and PCB layout, could significantly affect the product performance. It is the user’s responsibility to verify the actual circuit performance.