ISL8036ADUALEVAL1Z, ISL8036DUALEVAL1Z

Dual 3A 2.5MHz High Efficiency Synchronous Buck Regulator Evaluation Boards

Description

The ISL8036DUALEVAL1Z and ISL8036ADUALEVAL1Z kits are intended for use by individuals with requirements for Point-of-Load applications sourcing from 2.85V to 6V. These evaluation boards are used to demonstrate the performance of the ISL8036/ISL8036A low quiescent current mode converters.

ISL8036, ISL8036A are integrated power controllers rated for dual 3A output current or current sharing operation with a 1MHz (ISL8036)/2.5MHz (ISL8036A) step-down regulator, which is ideal for any low power low-voltage applications. The channels are 180° out-of-phase for input RMS current and EMI reduction. It is optimized for generating low output voltages down to 0.8V each.

Key Features

  • Switching Frequency: 2.5 MHz (ISL8036A) and 1 MHz ISL8036
  • Dual 3A High Efficiency Synchronous Buck Regulator with up to 95% Efficiency
  • 180° Out-of-Phase Providing Low Output Noise
  • Power-Goods (PG) Output with 1ms Delay
  • 2.85V to 6V Supply Voltage
  • 2% Output Accuracy Over-temperature/Load/Line
  • Start-up with Pre-biased Output
  • Externally Adjustable Soft-Start Time
  • Soft-Stop Output Discharge During Disabled
  • External Synchronization up to 6MHz
  • Typical 8µA Logic Controlled Shutdown Current
  • 100% Maximum Duty Cycle for Lowest Dropout
  • External Current Mode Compensation
  • Peak Current Limiting, Hiccup Mode Short Circuit Protection and Over-temperature Protection
  • Negative Current Detection and Protection

Applications

  • DC/DC POL Modules
  • µC/µP, FPGA and DSP Power
  • Plug-in DC/DC Modules for Routers and Switchers
  • Test and Measurement Systems
  • Li-ion Battery Power Devices
  • Bar Code Reader

ISL8036DUALEVAL1Z Buck Regulator Eval Board

ISL8036DUALEVAL1Z Buck Regulator Eval Board

 

Related Products

ISL8036

ISL8036A

Tool Information

No data found.

No product that matches the specified status or spec was found.
Please contact Renesas Electronics support

Disclaimer: THIS MATERIAL IS PROVIDED “AS-IS” FOR EVALUATION PURPOSES ONLY. RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (collectively, “Renesas”) DISCLAIM ALL WARRANTIES, INCLUDING WITHOUT LIMITATION, FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. Renesas provides evaluation platforms and design proposals to help our customers to develop products. However, factors beyond Renesas' control, including without limitation, component variations, temperature changes and PCB layout, could significantly affect the product performance. It is the user’s responsibility to verify the actual circuit performance.