ISL71840SEHEV1Z, ISL71841SEHEV1Z

Radiation Hardened 16 and 32-Channel Analog Multiplexer Eval Boards

Description

The ISL71840SEH (16-channel high) and ISL71841SEH (32-channel high) are a radiation hardened, ESD protected multiplexers fabricated using Intersil’s proprietary P6SOI (Silicon On Insulator) process technology to mitigate single-event effects and total ionizing dose.

The ISL71840SEHEV1Z evaluation board has a DIP switch, which provides a convenient way to address all 16 channels without the need for extra supplies.

The ISL71841SEHEV1Z evaluation board has a set of toggle switches, which provides a convenient way to address all 32 channels without the need for extra supplies.

Both boards feature a BNC input that will allow you to drive the address pins with a signal generator.

These evaluation boards operate with a dual supply voltage ranging from ±10.8V to ±16.5V and are designed to provide easy access to the capabilities of ISL71840SEH and ISL71841SEH.

Key Features

  • Jumper selectable input source for each input
  • DIP switch to conveniently select 1 of 16 channels [ISL71840SEHEV1Z] OR Toggle switches to conveniently select 1 of 32 channels [ISL71841SEHEV1Z]
  • BNC input for dynamic addressing
  • Multiple loading options with jumpers on VOUT
  • Convenient power connection
  • On-board enable switch

Specifications

This board has been configured and optimized for the following operating conditions:

  • V+ = +10.8V to +16.5V
  • V- = -10.8V to -16.5V
  • VREF = 4.5V to 5.5V

ISL71840SEHEV1Z, ISL71841SEHEV1Z Rad Hard Analog Mux Eval Boards

ISL71840SEHEV1Z, ISL71841SEHEV1Z Rad Hard Analog Mux Eval Boards

ISL71840SEHEV1Z, ISL71841SEHEV1Z Rad Hard Mux Eval Board Top

ISL71840SEHEV1Z, ISL71841SEHEV1Z Rad Hard Mux Eval Board Top

 

Related Products

ISL71840SEH

ISL71841SEH

Tool Information

No data found.

No product that matches the specified status or spec was found.
Please contact Renesas Electronics support

Disclaimer: THIS MATERIAL IS PROVIDED “AS-IS” FOR EVALUATION PURPOSES ONLY. RENESAS ELECTRONICS CORPORATION AND ITS SUBSIDIARIES (collectively, “Renesas”) DISCLAIM ALL WARRANTIES, INCLUDING WITHOUT LIMITATION, FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. Renesas provides evaluation platforms and design proposals to help our customers to develop products. However, factors beyond Renesas' control, including without limitation, component variations, temperature changes and PCB layout, could significantly affect the product performance. It is the user’s responsibility to verify the actual circuit performance.