Overview

Description

Operating from a 2.5V to 5.5V power supply, the SLG59M1714V is a 15mΩ, 4A single-channel load switch with back⁠-to-⁠back reverse‑current blocking when the power switch is disabled. With a fixed VOUT slew rate of 2.8V/ms, inrush current is internally limited. Incorporating two-stage current protection as well as thermal protection and fault signaling, the SLG59M1714V is designed for all 0.8V to 5.5V power rail applications. Fully specified over the -40 °C to 85 °C temperature range, the SLG59M1714V is packaged in a space-efficient, low thermal resistance 1.6mm x 2.5mm STQFN package.

Features

  • Optimized for all high-side power-rail control applications in adapter-powered devices, set-top boxes, tablet PCs, hard-disk and solid-state drives, and PCI/PCIe cards
  • 15mΩ RDSON
  • Back-to-back, reverse-current blocking (when OFF)
  • Maximum continuous FET current: 4A
  • Supply voltage: 2.5V ≤ VDD ≤ 5.5V
  • Wide input voltage range: 0.8V ≤ VIN ≤ VDD
  • Fixed VOUT slew rate: 2.8V/ms
  • Two-stage overcurrent protection:
    • Resistor-adjustable active current limit
    • Fixed 0.5A short-circuit current limit
  • Thermal shutdown protection
  • Analog FET current monitor output: 100μA/A
  • Open-drain FAULT signaling

Comparison

Applications

Applications

  • Notebook power rail switching
  • Tablet power rail switching
  • Smartphone power rail switching

Documentation

Type Title Date
Datasheet PDF 618 KB
Guide PDF 2.76 MB
Brochure PDF 5.06 MB
Application Note PDF 609 KB
4 items

Design & Development

Boards & Kits

Boards & Kits

Models