ISL95538B

Request Full Datasheet

Buck-Boost Narrow VDC Battery Charger for Power Bank Application with SMBus Interface and USB OTG

OVERVIEW

The ISL95538B is a buck-boost Narrow Output Voltage DC (NVDC) charger. The ISL95538B provides the NVDC charging function, system bus regulation, and protection features for tablet, Ultrabook, and notebook platforms. The advanced Renesas R3™ Technology provides high light-load efficiency and fast transient response.

In Charging mode, the ISL95538B takes input power from a wide range of DC power sources (such as conventional AC/DC charger adapters, USB PD ports, travel adapters) and safely charges battery packs with up to 4-series cell Li-ion batteries.

As an NVDC topology charger, the ISL95538B also regulates the system output to a narrow DC range for stable system bus voltage. The system power can be provided from the adapter, battery, or a combination of both. The ISL95538B can operate with only a battery, an adapter, or both connected.

The ISL95538B supports reverse buck, boost, or buck-boost operation to the input port from 2- to 4-cell batteries.

The ISL95538B has serial communication using SMBus/I2C that allows programming of many critical parameters to deliver a customized solution.

KEY FEATURES

    • Buck-boost NVDC charger for 1-, 2-, 3-, or 4-cell Li-ion batteries
    • Input voltage range 3.2V to 23.4V (no dead zone)
    • System output voltage 3V to 18.304V
    • Autonomous charging option (automatic end of charge and recharge)
    • Up to 1MHz switching frequency
    • Adapter current and battery current monitor (AMON/BMON)
    • PROCHOT# open-drain output, IMVP compliant
    • Allows trickle charging of depleted batteries
    • Ideal diode control in Turbo mode
    • Reverse buck, boost, and buck-boost operation from battery
    • Two-level adapter current limit available
    • Battery Ship mode option
    • SMBus and auto-increment I2C compatible
    • 4 x 4 32 Ld TQFN package

BLOCK DIAGRAM

 Block Diagram

PARAMETRICS

Parameters
ISL95538B
Basic Information
Production Status
Mass Production
Input Voltage Min (V)
3.2
Input Voltage Max (V)
23.4
Battery Charge Voltage (V)
3 to 18.304
Charging Voltage Accuracy Max (%)
±0.5
Battery Charge Voltage Adjust
8mV steps
Charge Current Limit Accuracy (%)
±2
Trickle Charge Current Limit
64mA, 128mA, 256mA, or 512mA
Automatic Power Source Selection
Yes
DC Adapter Detection
Yes
Topology
R3 modulator
Switching Frequency Typ (kHz)
733 or 1000
Max Duty Cycle (%)
100
Audible Noise
No
Thermal Shutdown (°C)
150 °C
Battery Chemistry
Multi-Cell Li+/Polymer
Qualification Level
Standard
Input Voltage Range (V)
3.2 to 23.4
Can Sample
YES
Temperature Range
-40 to +100

Confirm below disclaimers

Input Renesas account name and password