Enhanced CAN / LIN / IEBus and memory lineup from RL78/F14
RL78/F15 automotive microcontrollers employ the RL78 core, which realizes high processing performance while delivering the lowest power consumption in its class.
A high-speed on-chip oscillator provides 32 MHz CPU operation. An enhanced motor control functionality is offered by the motor control timer (Timer RD), the D/A converter and a built-in comparator. For easy migration RL78/F15 is pin- and software upwards compatible to RL78/F14.
The RL78/F15 Group even supports 125 ℃ (target) operation, whereby a CPU clock of 24 MHz can be reached. In addition abundant functions to support functional safety, like ECC on RAM and a stack pointer monitor as well as a A/D converter testing function are available.
With packages from 48 to 144-pin, a memory range from 128 to 512 KB flash, and advanced IPs for LIN and 2 channels of CAN communication and IEBus, these products are very well suited for a broad range of cost sensitive automotive applications like DC- & BLDC motor control, HVAC, lighting and many kinds of body ECUs.
|Pin Count||48 pin||64 pin||80 pin||100 pin||144 pin|
|Program Flash||384, 512 KB||128 to 512 KB|
|Data Flash||16 KB||8/16 KB|
|SRAM||26 to 32 KB||10 to 32 KB|
|Power Supply Voltage||2.7 to 5.5 V|
|Max. Frequency||32 MHz (L grade) / 24 MHz (K grade)|
|System Clock||Main Oscillator||Crystal/ Ceramic/ Square wave||1 – 20 MHz (2.7 – 5.5 V operation)|
|High Speed On-chip Oscillator||High precision||32 MHz (Typ.)|
|Low Speed On-chip Oscillator||Low speed operation||15 kHz (Typ.)|
|Sub Oscillator||32.768 kHz|
|Peripheral Clock||Low Speed On-chip Oscillator||Except WDT||15 kHz (Typ.)|
|WDT||15 kHz (Typ.)|
|POR||1.56 V (Rising Power supply voltage) Typ. / 1.55 V (Falling power supply voltage) Typ.|
|LVD||2.81 to 4.74 V (6 stage : Rising Power supply voltage)
2.75 to 4.64 V (6 stage : Falling Power supply voltage)
|Safety Function||Flash memory CRC, Frequency detection, Clock monitor, A/D diagnostic etc.|
|Input||Oscillation Pin Only||4|
|DTC||46 sources||50 sources||52 sources|
|Timers||Timer Array Unit (TAU)||16-bit 8 channels x 2 units||16-bit 8 channels x 3 units|
|Timer RJ||16-bit x 1 channel|
|Timer RD||16-bit x 2 channels|
|Communication Interface||CSI/SimpleI²C/UART||4 channels / 4 channels / 2 channels SPI function supported||6 channels / 4 channels / 3 channels SPI function supported|
|Multi-Master I²C||1 channel|
|IEBus Controller||1 channel|
|LIN/UART (RLIN3)||2 channels||3 channels|
|CAN Interface (RS-CAN lite)||2 channels|
|Analog||10-bit A/D Converter||22 channels||27 channels||33 channels|
|8-bit D/A Converter||1 channel|
|ELC||Link source : 26 channels , Link destination : 9 channels|
On-chip debugging emulator for RH850 family and RL78 family. Also available as a flash memory programmer.
Renesas Flash Programmer (Programming GUI)
The Renesas Flash Programmer provides usable and functional support for programming the on-chip flash memory of Renesas microcontrollers in each phase of development and mass production.
The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.
Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.