The ISL3232E, ISL4221E, and ISL4223E devices are 2. 7V to 5. 5V powered RS-232 transmitters/receivers that meet ElA/TIA-232 and V. 28/V. 24 specifications, even at VCC = 3. 0V. They provide ±15kV ESD protection (IEC61000-4-2 Air Gap and Human Body Model) on transmitter outputs and receiver inputs (RS-232 pins). Targeted applications are PDAs, Palmtops, and hand-held products where the low operational power consumption and even lower standby power consumption are critical. Efficient on-chip charge pumps, coupled with manual and automatic powerdown functions, reduce the standby supply current to a 150nA trickle. The 5mmx5mm Quad Flat No-Lead (QFN) packaging and the use of small, low value capacitors ensure board space savings. Data rates greater than 250kbps are ensured at worst case load conditions. The ISL4221E is a 1 driver, 1 receiver device and the ISL3232E and ISL4223E are 2 driver, 2 receiver devices that, coupled with the 5mmx5mm QFN package, provide the industry's smallest, lowest power serial port suitable for PDAs, and hand-held applications. The 5mmx5mm QFN requires 40% less board area than a 20 Ld TSSOP, and is nearly 20% thinner. The ISL4221E and ISL4223E versions feature an automatic powerdown function that powers down the on-chip power supply and driver circuits. Automatic powerdown occurs when an attached peripheral device is shut off or the RS-232 cable is removed, and conserves system power automatically without changes to the hardware or operating system. The ISL4221E and ISL4223E power back up automatically when a valid RS-232 voltage is applied to any receiver input.

Features

  • Available in near chip scale QFN (5mmx5mm) package, which is 40% smaller than a 20 Ld TSSOP
  • ESD protection for RS-232 I/O pins to ±15kV (IEC61000)
  • Meets EIA/TIA-232 and V.28/V.24 specifications at 3V
  • RS-232 compatible with VCC = 2.7V
  • On-chip voltage converters require only four external 0.1µF capacitors
  • Manual and automatic powerdown features (except ISL3232E)
  • Receiver hysteresis for improved noise immunity
  • Assured minimum data rate: 250kbps
  • Wide power supply range: single +2.7V to +5.5V
  • Low supply current in powerdown state: 150nA
  • Pb-free (RoHS compliant)

Applications

  • Any Space Constrained System Requiring RS-232 Ports Battery Powered, and Portable Equipment Hand-Held Products (GPS Receivers, Bar Code Scanners, etc) PDAs and Palmtops, Data Cables Cellular/Mobile Phones, Digital Cameras

descriptionDocumentation

Title language Type Format File Size Date
star ISL3232E, ISL4221E, ISL4223E Datasheet
Datasheet
PDF 364 KB
3.3V High-Speed Opto-Isolated RS-232 Interface with RV1S9160A and ISL3232E Rev.1.00
Application Note
PDF 231 KB
R15AN0002: RS-485 Transient Protection in Industrial DC-Supply Buses Rev.1.00
Application Note
PDF 178 KB
AN1992: Isolating RS-232 Interfaces with High-Speed Digital Optocouplers
Application Note
PDF 395 KB
AN1991: Isolating RS-485 Interfaces with High-Speed Digital Optocouplers
Application Note
PDF 513 KB
AN1987: RS-485 External Fail-Safe Biasing for Isolated Long Haul Buses
Application Note
PDF 443 KB
AN1986: External Fail-Safe Biasing of RS-485 Networks
Application Note
PDF 582 KB
AN1985: Transient Protection for the Standard RS-485 Transceiver: ISL3152E
Application Note
PDF 335 KB
AN1989: RS-422 vs RS-485: Similarities and Key Differences
Application Note
PDF 440 KB
AN1976: Important Transient Immunity Tests for RS-485 Networks
Application Note
PDF 338 KB
AN1977: Transient Voltage Suppressors: Operation and Features
Application Note
PDF 365 KB
AN1978: Surge Protection for Intersil's Standard RS-485 Transceivers
Application Note
PDF 369 KB
AN1979: Surge Protection simplified with Intersil's Overvoltage Protected (OVP) Transceivers
Application Note
PDF 500 KB
AN1980: Ground Potential Differences: Origin and Remedies
Application Note
PDF 375 KB
Analog ICs Brochure 日本語
Brochure
PDF 2.72 MB
TB363: Guidelines for Handling and Processing Moisture Sensitive Surface Mount Devices (SMDs)
Other
PDF 293 KB
TB389: PCB Land Pattern Design and Surface Mount Guidelines for QFN Packages
Other
PDF 958 KB
TB379: Thermal Characterization of Packaged Semiconductor Devices
Other
PDF 653 KB
PIN19028 - Q3 Cy 19 Price Increase Notice
Price Increase Notice
PDF 208 KB
PCN14011 - Alternate Manufacturing Facilities for Assembly of the Listed Intersil DFN/TDFN/QFN Packaged Products -Carsem (CAS) - Ipoh, Malaysia
Product Change Notice
PDF 225 KB
How to Simplify Industrial PC Interfaces 简体中文
White Paper
PDF 920 KB

file_downloadDownloads