Interface & Connectivity

Overview

Description

The ZIOL2401 is a line driver/level shifter IC that provides two independent HV I/O channels with a wide range of configurable system features. It addresses the physical layer of sensor/actuator systems in factory automation applications and is specifically designed to support the communication standard IO-Link. The output drivers are push-pull stages, which in tandem mode reach an RDSon of less than 3.3Ω at all operational temperatures. The configuration is stored in an on-chip EEPROM and automatically loaded into the ZIOL2401's control register during power up. The ZIOL2401 also provides status information, such as overload and over-temperature conditions. An integrated SPI interface supports access to configuration and status registers. The ZIOL2401 is fabricated in a powerful CMOS mixed-signal technology that allows supply voltages up to 40V. The EEPROM read/write functionality is guaranteed within the full operating temperature range in combination with a low-voltage core supply of 3.3V.

Features

  • Configurable output current limits 56mA to 410mA per channel
  • Standard cable driver/ physical layer transceiver for IO-Link (master and device)
  • Slew-rate controlled drivers
  • Wide range for configurable feature set, which is automatically loaded after power-on reset
  • Onboard DC/DC converter
  • IO-Link-specific WURQ detection
  • On chip registers and EEPROM for system configuration and status information
  • SPI interface for accessing on-chip registers and EEPROM
  • Digital interface: 3.3V output, 5V tolerant inputs
  • IC temperature monitoring/diagnosis

Applications

Documentation

Title Type Date
PDF148 KB
Datasheet - Short-form
PDF595 KB
Application Note
PDF1.53 MB
Datasheet
7Z1.21 MB
Guide

Design & Development

Software & Tools

Software Downloads

Title Type Date
ZIP20.89 MB
Software & Tools - Software

Boards & Kits

Boards & Kits

Models

Support

Videos & Training

RX23E-A IO-Link Temperature Sensor Solution