Overview

The IDT8T49N524I is an eight output programmable any-rate dual clock generator with selectable LVDS or LVPECL outputs. Both clock generators use Fractional Output Dividers to be able to generate output frequencies that are independent of each other and independent of the input frequency. Output frequencies for both clock generators are generated from a single crystal or reference clock. Clock Generator A supports three different factory-programmed default frequencies that can be selected from using only the FSEL control pins. Alternatively any desired output frequency can be programmed over the I2C serial port. The chosen output frequency is then driven out the QA0 to QA3 outputs.

Clock Generator B supports a single factory-programmed default frequency. It can also be programmed for any output frequency via the serial port. The output frequency is driven out the QB0 to QB3 outputs. Please consult IDT for programming software that can be used to determine the required settings for any desired configuration.

Excellent phase noise performance is achieved with IDT’s fourth Generation FemtoClock® NG PLL technology, which delivers sub-0.5ps RMS phase jitter in the integer divide mode.

8T49N524I - Block Diagram
8T49N524I - Pinout
8T49N524I - Block Diagram
8T49N524I - Pinout
  • Fourth Generation FemtoClock® NG PLL technology
  • Eight outputs selectable as LVPECL or LVDS
  • Input selectable: fundamental mode crystal or clock reference
  • Supports fundamental mode crystals from 10MHz - 40MHz
  • CLK, nCLK input pair can accept the following differential input levels: LVPECL, LVDS, HCSL
  • Input frequencies from 5MHz up to 800MHz
  • Two independent output frequencies can be generated
  • Output frequencies independent of each other and of input
  • Output frequencies from 15.5MHz - 650MHz, and 975MHz - 1300MHz
  • RMS phase jitter at 125MHz (12kHz - 20MHz): 0.282ps (typical)
  • RMS phase jitter at 156.25MHz (12kHz - 20MHz): 0.278ps (typical)
  • Full 2.5V or 3.3V power supply
  • I2C programming interface
  • -40°C to 85°C ambient operating temperature
  • Lead-free (RoHS 6) packaging
  • VCC / VCCA / VCCO
    • 3.3V / 3.3V / 3.3V
    • 3.3V / 3.3V / 2.5V (LVPECL only)
    • 2.5V / 2.5V / 2.5V
  • 4-output (8T49N004I) 6-output (8T49N006I) and 8-output (8T49N008I) with Integer Output Divider also available

Documentation

Design & Development

ECAD Models

Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.

Explore ECAD Models
Diagram of ECAD Models

Product Options

    Processing table
    Pkg. Type
    Lead Count (#)
    Temp. Grade
    Pb (Lead) Free
    Carrier Type
    Buy / Sample
    Part Number
    8T49N524-001NLGI
    circleObsolete
    memory
    view_in_ar
    		VFQFPN 40 I Yes Tray
    8T49N524-001NLGI8
    circleObsolete
    memory
    view_in_ar
    		VFQFPN 40 I Yes Reel
    8T49N524-002NLGI
    circleObsolete
    memory
    view_in_ar
    		VFQFPN 40 I Yes Tray
    8T49N524-002NLGI8
    circleObsolete
    memory
    view_in_ar
    		VFQFPN 40 I Yes Reel
    8T49N524-003NLGI
    circleObsolete
    memory
    view_in_ar
    		VFQFPN 40 I Yes Tray
    8T49N524-003NLGI8
    circleObsolete
    memory
    view_in_ar
    		VFQFPN 40 I Yes Reel
    8T49N524-004NLGI
    circleObsolete
    memory
    view_in_ar
    		VFQFPN 40 I Yes Tray
    8T49N524-004NLGI8
    circleObsolete
    memory
    view_in_ar
    		VFQFPN 40 I Yes Reel
    Parametric Table tips

    Tips for Using This Parametric Table:

    • Hide Filters button in header: Collapse or expands filters
    • Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
    • Reset button in header: Reset all filters to the page default
    • Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
    • Export button in header: Export the filtered results of the table to an Excel document
    • Filter parts search bar in header: Type to filter table results by part number
    • Hide column button in column headers: Select to hide columns in table
    • AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
    • Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
    • Document icon next to product name in row: View the featured document for this product
    • Chip icon next to the right of the document icon in row: View the block diagram for this product
    • Cart icon to the right of the chip icon: Indicates that samples are available for this product