This ultra compact indoor/outdoor/temperature/humidity sensor module comes in a very small footprint (22x22mm) with Arduino™ Nicla form factor and connections. The board is powered from an external 5V or 3V source respectively. Output data is issued via an I2C slave connection to the controlling host processor, or alternatively via SPI, or serial port. Alternative board population allows direct connection with a PMOD connector (I2C only) or via a wired connection using the VESLOV™ connector in the Arduino user space. The side connectors on the board allow direct soldering of the board on a host PCB, or via pins to the Arduino™ Nicla board.
System Benefits:
Select a block to discover products for your design
Title | Category | Buy / Sample |
---|---|---|
ISL9008A Low Noise LDO with Low IQ, High PSRR
|
Linear Regulators (LDO) | Buy / Sample |
ZMOD4410 Firmware Configurable Indoor Air Quality (IAQ) Sensor with Embedded Artificial Intelligence (AI)
|
Metal Oxide Gas Sensors | Buy / Sample |
ZMOD4510 Gas Sensor for O3 and NO2
|
Metal Oxide Gas Sensors | Buy / Sample |
HS4011 Relative Humidity and Temperature Sensor with Hydrophobic Membrane, Digital Output, ±1.5% RH
|
Humidity & Temperature Sensors | Buy / Sample |
RA2E1 48MHz Arm® Cortex®-M23 Entry Level General-Purpose Microcontroller
|
RA Arm® Cortex®-M MCUs, MCU / MPU Selection Table | Buy / Sample |