The PG-FP6 installed in a system is a tool for erasing, programming, and verifying programs on Renesas MCUs with on-chip flash memory.


Release Information

Programming GUI (FP6 Terminal)

  • Latest Ver.: V1.03.03
  • Released: Oct 08, 2019

Note: The FP6 Terminal includes parameter files, firmware, and USB drivers.


Release information (See Tool News)

Operating Environment


  • Control panel suitable for stand-alone operation (Learn More >>)
  • Simple and user-friendly GUI, FP6 Terminal (Learn More >>)
  • Useful functions for production line: programming using by buttons and automatic programming
  • Able to use USB power: convenient for programming in the field
  • High-speed downloading of files for programming from a PC to the PG-FP6 (Learn More >>)
  • High-speed programming of MCUs by the PG-FP6 for reduced production times (Learn More >>)
  • Support for high-volume programming by gang programming with the use of multiple PG-PF6s (Learn More >>)
  • Code storage capacity with 256MB for large flash memory
  • Security slot for theft prevention
  • High compatibility with the predecessor (Learn More >>)

Control panel suitable for stand-alone operation

User-friendly GUI (FP6 Terminal)

Major Functions

  • Stand-alone programming
  • PC-controlled programming using dedicated GUI (FP6 Terminal)
  • Up to 8 savable programming environments
  • Optimized for production line programming (command control or remote control)
  • Programming a unique code to a designated area of flash memory
  • Function to control PG-FP6 main unit (prohibiting uploading and setup)
  • Simultaneous selection of multiple program files
  • Gang programming

High Compatibility with the Predecessor

Designed with compatibility with the predecessor PG-FP5 in mind for smooth migration.

  • Setup files created with the PG-FP5 can be imported
  • Support of PG-FP5-enabled MCUs
    (For the V850 and 78K family, only MCUs with single-power-supply flash memory is supported.)
  • The same specifications of control buttons, message display, and status LEDs
  • The same specification of connector layout
  • Connectable to boards designed by using the PG-FP5
  • Pursuing programming GUI compatibility

*Function and performance comparisons with the PG-FP5 (Learn More >>)


External dimensions 140 × 90 × 30 mm (protruding parts excluded)
Weight Approximately 245 g
Host interface USB2.0(USB1.1),Serial interface
External control interface Provided
Terminal control Provided (command released)
Self-testing function Provided
Target interface CSI, CSI-H/S, UART, FINE
VDD supply from the programmer Provided
ROM code Max. 256 MB (divided by 8)
MCU-specific information Parameter file for the PG-FP6(Included in FP6 Terminal) Note1
Multiple files (max. 8) can be read.
MCU security settings Provided
Main unit security settings Provided
Simple mode Provided
Bank mode Provided
Single write operation
by a programmer
The NEXT, ENTER, or CANCEL buttons are used.
The START button is used for write operation.
Target cable 14-pin cable
Power Power supply adapter for the PG-FP6 (accessory)
or USB power supply
Programming GUI Programming GUI for the PG-FP6: FP6 Terminal Note1


  1. The FP6 Terminal for the PG-FP6 includes parameter files and firmware, which are provided separately for the PG-FP5, and USB drivers.


  • PG-FP6
  • GND cable
  • USB cable
  • Target cable (14-pin)
  • Power supply adapter
    The regulations with which the PG-FP6 conforms and plug shape vary depending on regions where the order is made.  See Power supply adapter. >>

Note: Programming GUI, FP6 Terminal, is available for download.

Ordering Information

Region Ordering Number
Japan RTE0T00001FWRJP000R
Europe, USA   RTE0T00001FWREA000R
China, Hong Kong, Chinese Taipei, South Korea, Singapore RTE0T00001FWRAS000R


  1. Since regulations that apply to the PG-FP6 vary with the region, we cannot ship a product to a region other than that from which the order was made. For example, if you place an order in Japan, you cannot purchase a product intended for Europe and the USA. Please purchase the product from a Renesas Electronics Corporation representative (responsible for sales) or distributor in the region where it is to be used.
  2. If you wish to know which model is available in a region not included in the above table, please contact either a Renesas Electronics Corporation representative (responsible for sales) or distributor.

Power Supply Adapter

The PG-FP6 includes a power supply adapter which conforms with the regulations and plug shapes in the region where the order is made.

Region Plug Shape Voltage
AC: 100-240V Note1



Hong Kong
Chinese Taipei
South Korea


  1. This is the range of voltages that the power-supply adapter can support. For the actual voltage through the power-supply cable, check the indication often be at the end of the casing for the plug.


PG-FP6 Usage Examples

Stand-alone (off-line) programming

PC programming

Production line programming

Field programming

Optional Products

Following optional products are provided to facilitate the use of the PG-FP6.

20-Pin Conversion Adapter for the PG-FP6 [RTE0T00001FWRB0000R]

This adapter is used for converting the 15-pin D-sub connectorNote1 to be connectable to the 20-pin CoreSight connector. The adapter comes with a 20-pin CoreSight cable (approximately 150-mm long).

Purpose: Programming RA- or RE-family MCUs on boards which have 20-pin CoreSight connectors.


  1. The target connecter on the PG-FP6.

20-Pin Conversion Adapter for the PG-FP6

20-Pin Conversion Adapter for the PG-FP6

14-Pin to 16-Pin Conversion Adapter for the E1 Emulator


This adapter converts the 14-pin, 2.54-mm pitch connector of the target cable to be connectable to the 16-pin, 2.54-mm pitch connector of the PG-FP5 or MINICUBE2.

Purpose: Programming 78K- or V850-family MCUs on boards which have 16-pin connectors.

User-system Interface Cable for the E2 Emulator (20-10 pins) [RTE0T00020KCAC1000J]

This cable is used for converting a CoreSight 20-pin connector to fit a CoreSight 10-pin connector, and is available for separate purchase. Use this conversion cable (approximately 150-mm long) along with the 20-pin conversion adapter for the PG-FP6.

Purpose: Programming RA- or RE-family MCUs on boards which have 10-pin CoreSight connectors.


User-system Interface Cable for the E2 Emulator (20-20pins) [RTE0T00020KCAC0000J]


This 20-pin CoreSight cable (approximately 150-mm long) is available for separate purchase. This cable also comes with the 20-pin conversion adapter for the PG-FP6.

Purpose: For use when, for example, the cable that comes with the product is damaged.

Target Devices


  1. Use programmers produced by partners for programming of the V850 and 78K with dual power supply flash memory, which assume mass production with mask ROM.

For details of support for individual device part numbers, see  List of MCUs supported by PG-FP6 (incl. information on components and parameter files)

Information Supporting Development Tools

Title Description
My Renesas Create a My Renesas account to use our tool download services, receive e-newsletter/update notifications, and take advantage of our other services.
e-learning Information for studying and learning about microcontrollers and microprocessors.
FAQ Frequently asked questions and useful hints for development.
Forum A forum and community site to share technical information, questions and opinions with others who use Renesas MCU's.
Tool News Tool release information and other important information.
Operating Environment Information on system requirements and operating environment for the latest version of tools.
Tool Environmental Information Information on RoHS compliance of tools.
Info on Discontinued Products A list of Renesas software and tools that have been discontinued and are no longer being offered for new projects.
PG-FP6 Gang Programming Function
Function and performance comparisons between PG-FP6 and PG-FP5


Tools Orderable Part Number (s) Production Status Manufacturer Suggested Single Tool Price
Description Distributor Stock Distributors Distributor Purchase Buy Direct
RTE0T00001FWRAS000R Mass Production Renesas call 1 0 聯系代理商 -

注意事项 :分销商价格可能会与所述预算价格有所不同。本网站上的定价与供货信息由瑞萨电子授权分销商提供的信息而定,如有更改恕不另行通知。通过在本页面上选择一位分销商,您将会从瑞萨电子网站跳转至分销商网站来完成购买。分销商的运营完全独立于瑞萨电子,有其自身的销售条款和条件。对于分销商与最终客户之间的交易,瑞萨电子不承担任何明示或暗示的陈述与担保责任。