Description

The ISL8104EVAL1Z evaluation board highlights the operations of the ISL8104 controller in a DC/DC application. The ISL8104 is a simple single-phase PWM controller for a synchronous buck converter with integrated MOSFET driver that operates from +8V to +14.4V bias supply voltage. The ISL8104 employs voltage-mode control with dual-edge modulation to achieve fast transient response. The controller features the ability to safely start-up into prebiased output loads and provides protection against overcurrent fault events. Overcurrent protection is implemented using topside MOSFET rDS(ON) sensing, eliminating the need for a current sensing resistor.

Key Features

  • +8V ±5% to +14V ±10% Bias Voltage Range
    • 1.5V to 15.4V Input Voltage Range
  • 0.597V Internal Reference Voltage
    • ±1.0% Over the Commercial Temperature Range
    • ±1.5% Over the Industrial Temperature Range
  • Voltage-Mode PWM Control with Dual-Edge Modulation
  • 14V High Speed N-Channel MOSFET Gate Drivers
    • 2.0A Source/3A Sink at 14V Bottom-Side Gate Drive
    • 1.25A Source/2A Sink at 14V Top-Side Gate Drive
  • Fast Transient Response
    • 15MHz (typ) Gain-Bandwidth Error Amplifier with 6V/µs slew rate
    • Full 0% to 100% Duty Cycle Support
  • Programmable Operating Frequency from 50kHz to 1.5MHz
  • Lossless Programmable Overcurrent Protection
    • Top-Side MOSFET's rDS(ON) Sensing
    • ~120ns Blanking Time
  • Sourcing and Sinking Current Capability
  • Support for Start-Up into Prebiased Loads

Applications

  • Test and Measurement Instruments
  • Distributed DC/DC Power Architecture
  • Industrial Applications
  • Telecom/Datacom Applications

ISL8104EVAL1Z PWM Controller Eval Board

ISL8104EVAL1Z PWM Controller Eval Board

 

Related Products

ISL8104

可订购工具信息

无结果数据

No product that matches the specified status or spec was found.
Please contact Renesas Electronics support