Dedicated protocol H/W (EtherCAT / Sercos III) + R-IN engine covers major industrial protocols
RZ/N1L equipped with "R-IN engine" which is an accelerator for industrial Ethernet communication can be used for the communication parts of industrial network device where real-time responsibility is required.
With integrated EtherCAT and Sercos III slave dedicated H/W, it is possible to handle a wide range of protocols.
Key Features :
|Power Supply Voltage||3.3 V for I/O, 1.15V for CPU|
|CPU Core||Arm® Cortex®-M3 (R-IN engine)|
|Maximum Operating Frequency||125 MHz|
|SRAM with ECC||6 MB|
|External Memory||NAND Flash Controller||Supported|
|Quad-I/O SPI||1 channel|
|Network Function||R-IN engine and Hardware RTOS||Supported|
|Ethernet Port||3 ports
|Selectable from GMAC、EtherCAT®、Sercos® Ⅲ|
|Independent GMAC||Up to 1 port|
|EtherCAT Slave Controller||Up to 2 ports
|SercosIII Slave Controller||Up to 2 ports
|Timer Function||General Timers||(16 bit x 6 channels + 32 bit × 2 channels) × 2|
|PWM Timers||16-bit x 16 channels|
(12-bit resolution A/D Converter)
|8 channels x 1 unit|
|Communication Interface||UART||8 channels|
|USB 2.0||Host and function|
|SPI||Master 4 channels + Slave 2channels|
|I/O Port||Max. 95|
|Package||196-pin LFBGA(12 x 12 mm, 0.8 mm pitch)|
|Operating temperature range||Tj = -40℃ ～ +110℃|
Pin Count / Memory Size:
You can find an explanation of orderable part numbers here.
Resources for Software and Hardware
|My Renesas||Create a My Renesas account to use our tool download services, receive e-newsletter/update notifications, and take advantage of our other services.|
|e-learning||Information for studying and learning about microcontrollers and microprocessors.|
|FAQ||Frequently asked questions and useful hints for development.|
|Forum||A forum and community site to share technical information, questions and opinions with others who use Renesas products.|
Hardware Design Support
|IBIS/BSDL||IBIS standard simulation data is required for high-speed board design
and can be used to run simulations to examine and troubleshoot issues
such as waveform reflection, ringing, and so on, before producing the
BSDL is a data input format supported by most IEEE 1149.1 (JTAG)-compliant tools. The automatic test pattern generation (ATPG) and automatic test equipment functions of these tools facilitate testing.
The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.
Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.