The IDT5V995 is a high fanout 3.3V PLL based clock driver intended for high performance computing and data-communications applications. A key feature of the programmable skew is the ability of outputs to lead or lag the REF input signal. The IDT5V995 has eight programmable skew outputs in four banks of 2. Skew is controlled by 3-level input signals that may be hardwired to appropriate HIGH-MID-LOW levels. The feedback input allows divide-by-functionality from 1 to 12 through the use of the DS[1:0] inputs. This provides the user with frequency multiplication from 1 to 12 without using divided outputs for feedback. When the sOE pin is held low, all the outputs are synchronously enabled. However, if sOE is held high, all the outputs except 2Q0 and 2Q1 are synchronously disabled. The LOCK output asserts to indicate when Phase Lock has been achieved. Furthermore, when PE is held high, all the outputs are synchronized with the positive edge of the REF clock input. When PE is held low, all the outputs are synchronized with the negative edge of REF. The IDT5V995 has LVTTL outputs with 12mA balanced drive outputs.

特長

  • Ref input is 5V tolerant
  • 4 pairs of programmable skew outputs
  • Low skew: 185ps same pair, 250ps all outputs
  • Selectable positive or negative edge synchronization: Excellent for DSP applications
  • Synchronous output enable
  • Input frequency: 2MHz to 200MHz
  • Output frequency: 6MHz to 200MHz
  • 3-level inputs for skew and PLL range control
  • 3-level inputs for feedback divide selection multiply / divide ratios of (1-6, 8, 10, 12) / (2, 4)
  • PLL bypass for DC testing
  • External feedback, internal loop filter
  • 12mA balanced drive outputs
  • Low Jitter: <100ps cycle-to-cycle
  • Power-down mode
  • Lock indicator
  • Available in TQFP package
  • Not Recommended for New Design

製品選択

発注型名 Part Status Pkg. Type Lead Count (#) Temp. Grade Pb (Lead) Free Carrier Type 購入/サンプル
5V995PFGI
Obsolete TQFP 44 I はい Tray
Availability

ドキュメント&ダウンロード

タイトル 他の言語 分類 形式 サイズ 日付
アプリケーションノート、ホワイトペーパー
AN-828 Termination - LVPECL アプリケーションノート PDF 322 KB
AN-831 The Crystal Load curve アプリケーションノート PDF 395 KB
AN-845 Termination - LVCMOS アプリケーションノート PDF 146 KB
AN-844 Termination - AC Coupling Clock Receivers アプリケーションノート PDF 170 KB
AN-842 Thermal Considerations in Package Design and Selection アプリケーションノート PDF 495 KB
AN-803 Crystal Timing Budget and Accuracy for IDT Timing Clock Products アプリケーションノート PDF 128 KB
AN-840 Jitter Specifications for Timing Signals アプリケーションノート PDF 442 KB
AN-838 Peak-to-Peak Jitter Calculations アプリケーションノート PDF 115 KB
AN-839 RMS Phase Jitter アプリケーションノート PDF 233 KB
AN-832 Timing Budget and Accuracy アプリケーションノート PDF 131 KB
AN-834 Hot-Swap Recommendations アプリケーションノート PDF 153 KB
AN-836 Differential Input to Accept Single-ended Levels アプリケーションノート PDF 120 KB
AN-835 Differential Input with VCMR being VIH Referenced アプリケーションノート PDF 160 KB
AN-830 Quartz Crystal Drive Level アプリケーションノート PDF 143 KB
AN-827 Application Relevance of Clock Jitter アプリケーションノート PDF 1.15 MB
AN-815 Understanding Jitter Units アプリケーションノート PDF 565 KB
AN-802 Crystal-Measuring Oscillator Negative Resistance アプリケーションノート PDF 136 KB
AN-801 Crystal-High Drive Level アプリケーションノート PDF 202 KB
AN-806 Power Supply Noise Rejection アプリケーションノート PDF 438 KB
AN-805 Recommended Ferrite Beads アプリケーションノート PDF 121 KB
PCN / PDN
PDN# : CQ-13-02 (R1) PRODUCT DISCONTINUANCE NOTICE 製品中止通知 PDF 601 KB
PDN# : CQ-13-02 Q2FY14 Quarter PDN for Manufacturing Discontinuance 製品中止通知 PDF 327 KB