GreenPAK SLG46537 (STQFN-20) Development Kit with Socket Adapter
The SLG46537V-SKT includes the SLG4SA20-20x30 socket adapter and 50 SLG46537V (STQFN-20) samples.
GreenPAK™ Programmable Mixed-signal Matrix with Asynchronous State Machine
跳转至页面部分：
概览
简介
The SLG46537V/M provides a small, low power component for commonly used mixed-signal functions. The user creates their circuit design by programming the one time Non-Volatile Memory (NVM) to configure the interconnect logic, the I/O Pins and the macro cells of the SLG46537V/M. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a very small, low power single integrated circuit.
特性
- Logic & Mixed Signal Circuits
- Highly Versatile Macrocells
- Read Back Protection (Read Lock)
- 1.8 V (±5%) to 5 V (±10%) Supply
- Operating Temperature Range: -40°C to 85°C
- RoHS Compliant / Halogen-Free
Macrocells Overview
- Four Analog Comparators (ACMP);
- Two Voltage References (Vref);
- Seventeen Combination Function Macrocells:
- Three Selectable DFF/Latch or 2-bit LUTs;
- One Selectable Continuous DFF/Latch or 3-bit LUT;
- Four Selectable DFF/Latch or 3-bit LUTs;
- One Selectable Pipe Delay or 3-bit LUT;
- One Selectable Programmable Pattern Generator or 2-bit LUT;
- Five 8-bit delays/counters or 3-bit LUTs;
- Two 16-bit delays/counters or 4-bit LUTs;
- Asynchronous State Machine:
- Eight States;
- Flexible input logic from state transitions;
- Serial Communications:
- I2C Protocol compliant;
- Pipe Delay – 16 stage/3 output (Part of Combination Function Macrocell);
- Programmable Delay;
- Additional Logic Functions – 2 Deglitch Filters with Edge Detectors;
- Two Oscillators (OSC):
- Configurable 25 kHz/2 MHz;
- 25 MHz RC Oscillator;
- Crystal Oscillator;
- Power-On-Reset (POR);
- Eight Byte RAM + OTP User Memory:
- RAM Memory space that is readable and writable via I2C;
- User defined initial values transferred from OTP;
- Analog Temperature Sensor.
产品对比
应用
应用
- Personal Computers and Servers
- PC Peripherals
- Consumer Electronics
- Data Communications Equipment
- Handheld and Portable Electronics
设计和开发
软件与工具
软件与工具
| Software title
|
Software type
|
公司
|
|---|---|---|
| Go Configure™ Software Hub Go Configure Software Hub provides development support for a variety of products, including GreenPAK configurable mixed signal matrix and ForgeFPGA™ devices.
|
Software Package | 瑞萨电子 |
1 item
|
||
开发板与套件
开发板与套件
GreenPAK SLG46537 (STQFN-20) 20-pin DIP Prototyping Board
The SLG46537V-DIP 20-pin DIP Prototyping Board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced...
GreenPAK SLG46537 （MSTQFN-20） 20 引脚 DIP 原型开发板
SLG46537M-DIP 20 引脚 DIP 板非常适合试验(面包)板和快速原型(设计评估)。 它可以搭配DIP适配器（SLG4SA-DIP）将其与高级开发板一起使用。
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
GreenPAK DIP Adapter for GreenPAK Advanced Development Board allows the use of the SLG46xxxV-DIP Proto boards with the GreenPAK Advanced Development Board. Acts as the...
GreenPAK SLG46537 (MSTQFN-22) Development Kit with Socket Adapter
The SLG46537M-SKT includes the SLG4SA22-20x22 socket adapter and 50 SLG46537M (MSTQFN-22) samples.
GreenPAK™ Keypad Scanner Demonstration Board
The SLG4KPDSC-DMO is a keypad scanner demonstration board.
Using an MCU or SoC to scan a keypad is a less than ideal solution for human input. It often makes sense...
GreenPAK Introduction Kit
The SLG4DVKINTRO GreenPAK Introduction Kit is perfect for new customer evaluation.
GreenPAK Introduction Kit includes:
- SLG4DVKADV GreenPAK Advanced Development...
GreenPAK高级开发板
搭配SLG46xxxX-SKT基座套件，为GreenPAK器件提供完整的编程、仿真和测试功能...
可在云上实验室使用
使用我们基于 PC 的 GUI，无需物理板即可在虚拟实验室中立即开始配置和测试设计
GreenPAK DIP Development Board
The SLG4DVKDIP is perfect for breadboarding and fast prototyping. Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers...
GreenPAK Serial Debugger Board (GSD)
GreenPAK Serial Debugger (GSD) device can be used for programming GreenPAK products with multiple-time Non-Volatile Memory (NVM) or for configuring the interconnect...
GreenPAK Lite Development Board
The GreenPAK Lite Development Board provides full programming, emulation, and testing functions for GreenPAK devices, working in a pair with the Go Configure™ Software...
模型
ECAD 模块
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.
此为出厂可配置设备。试用自定义部件配置工具。
Processing table
Tips for Using This Parametric Table:
- Hide Filters button in header: Collapse or expands filters
- Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
- Reset button in header: Reset all filters to the page default
- Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
- Export button in header: Export the filtered results of the table to an Excel document
- Filter parts search bar in header: Type to filter table results by part number
- Hide column button in column headers: Select to hide columns in table
- AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
- Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
- Document icon next to product name in row: View the featured document for this product
- Chip icon next to the right of the document icon in row: View the block diagram for this product
- Cart icon to the right of the chip icon: Indicates that samples are available for this product
视频和培训
GreenPAK I2C
Video List