概要

説明

ISL85003とISL85003Aは、ハイサイドとローサイドのFETを内蔵した同期整流降圧レギュレータです。 このレギュレータは非常に効率的な連続 3A 電流を供給しながら、4.5V ~ 18V の入力電圧範囲で動作できます。これらはすべて、非常にコンパクトな3mm x 4mm DFNパッケージで提供されます。

ISL85003はルネサス独自の製造プロセスに基づいて設計されており、最適化された電流モード・コントローラを内蔵し、非常に低いrDS(ON)FETを実現するように設計されています。 ハイサイドNFETは65mΩのrDS(ON)を持つように設計されており、ローサイドNFETは45mΩのrDS(ON)を持つように設計されています。 これら2つのFETにより、デバイスは非常に高効率の電力を負荷に供給します。

ISL85003は、DCMとCCMを自動的に切り替えて、DCMの軽負荷効率を実現できます。 CCMのスイッチング周波数は内部で500kHzに設定されています。 このデバイスは、広いライン、負荷、および温度範囲にわたって±1%の最大スタティック・レギュレーション許容誤差を提供します。 出力は、外部抵抗を使用して最小 0.8V までユーザーが調整できます。EN を 0.6V 以上にすると、コントローラがイネーブルになります。レギュレータはプリバイアス出力をサポートしています。 故障保護は、正または負の過電流状態時の内部電流制限、出力および入力の低電圧および過電圧検出、および過熱監視回路によって提供されます。

特長

  • 入力電圧範囲4.5V〜18V
  • 出力電圧は0.8V、±1%から調整可能
  • 最大95%の効率
  • 低電圧検出機能付きブートダイオード内蔵
  • 電流モード制御
  • DCM/CCM
    • 内部または外部補償オプション
    • 500kHzのスイッチング周波数オプション
    • ISL85003で最大2MHzの外部同期
  • ISL85003Aのソフトスタート時間を調整可能
  • オープンドレインPGウィンドウコンパレータ
    • 内蔵の保護機能
    • 正および負の過電流保護
    • 過電圧および過熱保護
    • 入力過電圧保護
  • 小型 12 Ld 3mm x 4mm デュアルフラットノーリード (DFN) パッケージ

製品比較

アプリケーション

アプリケーション

  • ネットワークおよび通信機器
  • 産業用機器のプロセス制御
  • 多機能プリンター
  • ポイントオブロードレギュレータ
  • 標準12Vレール電源
  • 組み込みコンピューティング

ドキュメント

分類 タイトル 日付
データシート PDF 3.32 MB
カタログ PDF 5.63 MB 英語
ホワイトペーパー PDF 378 KB
アプリケーションノート PDF 592 KB
アプリケーションノート PDF 509 KB
アプリケーションノート PDF 397 KB
アプリケーションノート PDF 650 KB
アプリケーションノート PDF 387 KB
アプリケーションノート PDF 349 KB
9 items

設計・開発

ソフトウェア/ツール

ソフトウェア/ツール

Software title
Software type
会社名
iSim:PE Offline Simulation Tool
iSim Personal Edition (iSim:PE) speeds the design cycle and reduces risk early in any project, identifying parts that can be used in current as well as next-generation designs.
Simulator ルネサス
1 item

ボード&キット

ボード&キット

モデル

12V Sync Buck Regulator Family Delivers Up to 14A

Find out how Intersil's high efficient, compact 12V synchronous buck regulator family can meet your power requirements for 12V rails in industrial and infrastructure applications.

Transcript

12V Synchronous Buck Regulator Family

Today I would like to introduce one of the most efficient and compact synchronous buck regulator families in the marketplace today.

There are many 12V rails in industrial applications today that need a buck converter to step the voltage down to a lower voltage and deliver up to 14A. Some of these applications often require a very efficient and compact solution. The highly integrated buck regulators listed here allow the users to meet all these requirements.

The ISL85009, ISL85012 and ISL85014 are pin compatible, very efficient and are able to deliver up to 14A. In applications that need less than 5A, Renesas offers ISL85003 and ISL85005 that are pin compatible. The ISL85009, ISL85012 and ISL85014 can operate from 3.8V to 18V input voltage, and the output voltage can be set as low as 0.6V. This family is highly integrated. The high-side and low-side FETs, with a bootstrap diode and compensation circuits are all integrated which helps to reduce the size, cost and bill of material.

This family is also highly reliable. It has high-side and low-side overcurrent protection, input and output overvoltage protection, over-temperature protection and negative current protection all integrated in the IC. This family also provides full feature sets and design flexibility to customers.

For instance, the selectable OCP scheme feature gives flexibility to the power supply designer to choose between hiccup and latch-off OCP mode, depending on their application requirements. Finally, the ISL85009, ISL85012 and ISL85014 are pin compatible, highly efficient and capable of delivering up to 14A in a very small 3.5mm x 3.5mm TQFN package.

As you see in the efficiency curve here, the ISL85009 provides one of the most efficient solution in the marketplace today. To support our customers with this family, we have developed several evaluation and demo boards.

Supporting tools such as iSim model, PowerCompass, schematic and Gerber files are all available online for this family on our website.