Configurable AFE, high-precision analog RL78/I1E microcontroller

 

The RL78/I1E microcontroller is an intelligent, flexible analog MCU suitable for countless industrial and medical sensing applications such as flow measurement, strain gauges, pressure or temperature sensing. With enhanced analog features such as configurable OpAmps with programmable gain, supporting inverting, non-inverting topologies, or instrumentation amplifers, the RL78/I1E can be a platform for different types of sensors. The RL78/I1E features a 24-bit delta-sigma A/D, and a separate 10-bit A/D block, with a 12-bit D/A. The package line up for RL78/I1E MCU goes down to 4 mm x 4 mm or 5 mm x 5 mm reducing PCB footprint. Operating temperature up to 125C makes it an ideal solution for the harshest of environments.

 

Key Features:

ITEM RL78/I1E
Pin Count 32-pin 36-pin
Parts Name R5F11CBC R5F11CCC
Memory Program Flash 32 KB
Data Flash 4 KB
SRAM 8 KB
CPU RL78 CPU with Multiplier/Divider, MAC instruction
Clock Generator Crystal/Ceramic 1MHz to 20MHz
On-chip Oscillator High Speed 1MHz~32MHz +/-2%(-40 to 105˚C), +/-3%(-40 to 125˚C)
Low Speed 15kHz +/-15%
PLL Built-in
I/O Port Total 10 14
CMOS I/O 7 11
CMOS input 3 3
Timer 16-bit timer TAU 6 channels
Timer RJ 1 channel
Timer RG 1 channel
15-bit timer Interval timer x 1channel (Low speed On-chip-OSC / RTC clock)
Real Time Clock (RTC) 1 channel
Analog 8/10-bit A/D converter 8 channels 10 channels
24-bit Delta-Sigma A/D converter Input channel 3 channels 4 channels
Sampling rate (normal mode) 0.5 to 16ksps
Amp Gain x1 to x64
Analog Front End temperature sensor 1 channel
Configurable Amplifier 3 channels
12-bit D/A converter 1 channel
Serial Interfaces CSI 2ch/ UART/ I2C 2ch 1 unit
UART 1 channel
External Interrupt port 7 8
DTC (data transfer controller) Activation source: 23
ELC (event link controller) Event source:16, Link module:7
Other peripherals LVD, POR
Safety Function WDT, TRAP Instruction, Flash Memory CRC Calculation, RAM Parity Error Check, Illegal Memory Access Detection, Clock Stop/Frequency Detection, RAM Write Protection, SFR Write Protection, A/DC Test Function, Port read function during Output mode
On-chip Debug Function Supported
Power Supply Voltage MCU : 2.4 V to 5.5 V, Analog : 2.7 V to 5.5V
Operating ambient temperature TA = -40 to +105°C (G: Industrial applications)
TA = -40 to +125°C (M: Industrial applications)

Pin Count / Memory Size Lineup:

Program Flash
SRAM

32KB
8KB
Pins
Package
32
HVQFN
36
TFBGA

 

Block Diagram:

You can find an explanation of orderable part numbers here.

 

Resources for Software and Hardware

Title Description
My Renesas Create a My Renesas account to use our tool download services, receive e-newsletter/update notifications, and take advantage of our other services.
e-learning Information for studying and learning about microcontrollers and microprocessors.
FAQ Frequently asked questions and useful hints for development.
Forum A forum and community site to share technical information, questions and opinions with others who use Renesas products.

 

Software Design Support

Title Description
e² studio This integrated development environment (IDE) is based on the popular combination of the open-source Eclipse IDE and its CDT plug-in that enables C/C++ language development.
CS+ This integrated development environment (IDE) can be used for coding, assembly, compiling, and simulation. CS+ is also included with starter kits.
E2 emulator Lite This entry-level on-chip debugging emulator provides functionality equivalent to that of the E1 emulator at a low price.
E2 emulator This on-chip debugging emulator has advanced features that improve the efficiency of development. In addition to the basic functions from debugging to flash programming, this emulator supports hot plug-in and external triggers as standard items. This emulator also helps to reduce development time by downloading at high speeds (compared to the E1 emulator) and the ability to work in combination with various solutions such as the tuning of current drawn by systems under development.
E1 emulator This on-chip debugging emulator is a standard model which provides basic debugging functions (production is to be discontinued at the end of December 2019).
You can filter the sample codes and application notes that are displayed using the below filters.

Action Needed

Disclaimer:

The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.

Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.