概览

简介

The ZSSC5101 is a CMOS integrated circuit for converting sine and cosine signals obtained from magnetoresistive bridge sensors into a ratiometric analog voltage with a user-programmable range of travel and clamping levels. The ZSSC5101 accepts sensor bridge arrangements for both rotational as well as linear movement. Depending on the type of sensor bridge, a full-scale travel range of up to 360 mechanical degrees can be obtained. Programming of the device is performed through the output pin, allowing in-line programming of fully assembled 3-wire sensors. Programming parameters are stored in an EEPROM and can be re-programmed multiple times. The ZSSC5101 is fully automotive-qualified with an ambient temperature range up to 150°C for SSOP-14 or 160°C for die.

特性

  • Ratiometric analog output
  • Up to 4608 analog steps
  • Step size as small as 0.022°
  • Programming through output pin via one-wire interface
  • Offset and amplitude calibration of the bridge input signals
  • Programmable linear transfer characteristic: zero position, angular range, upper and lower clamping levels, rising or falling slope
  • Loss of magnet indication with programmable threshold level
  • Accepts anisotropic, giant, and tunnel magnetoresistive bridge sensors (AMR, GMR and TMR)
  • Programmable 32-bit user ID
  • CRC, error detection, and error correction on EEPROM data
  • Diagnostics: broken-wire detection
  • Automotive-qualified to AEC-Q100, grade 0

产品对比

应用

文档

类型 文档标题 日期
数据手册 PDF 724 KB
指南 7Z 1.21 MB
手册 - 开发工具 PDF 906 KB
数据手册 - 简易格式 PDF 196 KB
4 items

设计和开发

软件与工具

软件下载

类型 文档标题 日期
软件和工具 - 评估软件 登录后下载 ZIP 25.98 MB
1 item

开发板与套件

开发板与套件

模型

ZSSC5101 Magnetic Sensor Interface IC for Magnetoresistive Bridge Sensors

The ZSSC5101 is a CMOS integrated circuit for con­verting sine and cosine signals obtained from magnetoresistive bridge sensors into a ratiometric analog voltage with a user-programmable range of travel and clamping levels. The ZSSC5101 accepts sensor bridge arrangements for both rotational as well as linear movement. Depending on the type of sensor bridge, a full-scale travel range of up to 360 mechanical degrees can be obtained. Programming of the device is performed through the output pin, allowing in-line programming of fully assembled 3-wire sensors. Programming param­eters are stored in an EEPROM and can be re-pro­grammed multiple times. The ZSSC5101 is fully automotive-qualified with an ambient temperature range up to 150°C for SSOP-14 or 160°C for die.

For more information about the ZSSC5101 visit www.IDT.com/ZSSC5101.