The R2A20113A controls a boost converter to provide an active power factor correction.
The R2A20113A adopts critical conduction mode for power factor correction and realizes high efficiency and a low switching noise by zero current switching.
Because the zero current is detected by using the GND current, the ZCD Auxiliary winding is unnecessary.
The feedback loop open detection, two mode overvoltage protection, overcurrent protection are built in the R2A20113A, and can constitute a power supply system of high reliability with few external parts.
- Absolute Maximum Ratings
Supply voltage Vcc: 24 V
Junction temperature Tj: –40 to +150°C
- Electrical characteristics
UVLO operation start voltage VH: 12 V ± 0.8 V
UVLO operation shutdown voltage VL: 9.2 V ± 0.7 V
UVLO hysteresis voltage Hysuvl: 2.8 V ± 0.7 V
Boost converter control with critical conduction mode
Two mode overvoltage protection
Mode 1: Dynamic OVP corresponding to a voltage rise by load change
Mode 2: Static OVP corresponding to overvoltage in stable.
Feedback loop open detection
Dynamic UVP corresponding to a voltage fall by load change
Off Time Control function (Frequency Limitter)
Package lineup: Pb-free SOP-8 (JEDEC)
Below you will find information to support the development of your application.
Resources for Software and Hardware
|My Renesas||Create a My Renesas account to use our tool download services, receive e-newsletter/update notifications, and take advantage of our other services.|
|e-learning||Information for studying and learning about microcontrollers and microprocessors.|
|FAQ||Frequently asked questions and useful hints for development.|
|Forum||A forum and community site to share technical information, questions and opinions with others who use Renesas products.|
|Video||Watch videos related to this product.|