RL78/G13

The standard for general-purpose microcontroller with low power, high function, and abundant lineup

The RL78/G13 microcontrollers balance the industry's lowest level of consumption current (CPU: 66 μA/MHz, standby (STOP): 230 nA) and a high performance of 43.2 DMIPS (32 MHz). They have an on-chip oscillator, data flash, A/D converter, and more. Built-in safety features (function that detects illegal operation of hardware) enable support for the household appliance safety standard (IEC/UL 60730). These microcontrollers can be used in a wide variety of applications from home and consumer appliances to industrial equipment.

Main Solutions

Key Features:

ITEM		RL78/G13
Pin Count		20/24/25 pins	30/32/36 pins	40 pins	44/48 pins	52/64 pins	80/100 pins	128 pins
CPU Core		RL78 Core
Prpgram Flash (KB)		16 to 64	16 to 128	16 to 192	16 to 512	32 to 512 ※1	96 to 512	192 to 512
Data Flash (KB) ※2		4 R5F1006x R5F1007x R5F1008x	4 to 8 R5F100Ax R5F100Bx R5F100Cx	4 to 8 R5F100Ex	4 to 8 R5F100Fx R5F100Gx	4 to 8 R5F100J R5F100Lx	8 R5F100Mx R5F100Px	8 R5F100Sx
SRAM (KB)		2 to 4	2 to 12	2 to 16	2 to 32	2 to 32	8 to 32	16 to 32
Main System Clock	High-speed system clock(fMX)	X1 (crystal/ceramic) oscillation, external main system clock input (EXCLK): 1 to 20 MHz (VDD = 2.7 to 5.5 V) 1 to 16 MHz (VDD = 2.4 to 5.5 V) 1 to 8 MHz (VDD = 1.8 to 5.5 V) 1 to 4 MHz (VDD = 1.6 to 5.5 V)
Main System Clock	High-speed on-chip oscillator clock (fIH)	1 to 32 MHz (VDD = 2.7 to 5.5 V) 1 to 16 MHz (VDD = 2.4 to 5.5 V) 1 to 8 MHz (VDD = 1.8 to 5.5 V) 1 to 4 MHz (VDD = 1.6 to 5.5 V)
Subsystem Clock		-		XT1 (crystal) oscillation, external subsystem clock input (EXCLKS) 32.768 kHz
Low-speed on-chip oscillator clock		15 kHz (VDD = 1.6 - 5.5 V)
I/O port	TOTAL	16/20/21	26/28/32	36	40/44	48/58	74/92	120
	N-ch open drain I/O (6 V tolerance)	-/2/2	2/3/3	3	4/4			4
	N-ch open drain I/O (VDD tolerance)	5/5/6	9/9/10	10	10/11	13/15	21/24	25
Timer	16 bit (TAU)	8 ch, PWM　output/20 pins: 2, 24 pins: 3, 25 pins: 3))	8 ch, PWM　output x 3	8 ch, PWM　output x 3	8 ch, PWM　output x 4	8 ch, PWM　output/52 pins: 4, 64 pins: 7	12 ch, PWM　output x 10	16 ch, PWM　output x 14
	12-bit interval timer	1
	Watchdog timer	1
Serial Interface	CSI:1 ch/UART:1 ch/simplifiedI²C: 1 ch	2			2/1	1/-	-
	CSI:2 ch/UART:1 ch/simplifiedI²C: 2 ch	-			-/1	1/2	3
	CSI:1 ch/UART (LIN-bus corres-pondence): 1 ch/simplifiedI2C: 1 ch	-	1/1/-	-
	CSI:1 ch/UART(bus corres-pondence):1 ch/simplifiedI2C:2 ch	-	-/-/1	1
	I²C bus	-/1/1	1				2
8/10-bit resolution A/D converter		6	8	9	10	12	17/20	26
Clock/Buzzer output		-/-/1	2
Power-on reset		ON
DMA		2					4
External interrupt pins		3/5/5	6	10	10/13	15/16	16
Multiplier/divider/multiply-accumulator		Multiplication/Division multiply library support (unit operations)
Safety Function		RAM parity error detection
		Invalid memory access detection
		Frequency detection
		A/D converter testing
		CRC calculation（General purpose、High-speed)
		RAM guarding
		SFR　guarding
On-chip debug		ON
Power supply voltage		VDD=1.6～5.5V
Operating ambient temperature		TA = - 40 to + 85 ℃ (A-version for consumer applications and D-version for industrial applications) TA = - 40 to + 105 ℃(G-version for industrial applications)

Pin Count / Memory Size Lineup:

Program Flash
SRAM

Pins Package	20 LSSOP	24 HWQFN	25 WFLGA	30 LSSOP	32 HWQFN	36 WFLGA	40 HWQFN	44 LQFP	48 LFQFP	48 HWQFN	52 LQFP	64 LQFP	64 LFQFP	64 VFBGA	80 LQFP	80 LFQFP	100 LQFP	100 LFQFP	128 LFQFP
512KB 32KB								^34	^34	^34	^34	^34	^34	^34	^34	^34	^34	^34	^34
384KB 24KB								^*4	^*4	^*4	^*4	^*4	^*4	^*4	^*4	^*4	^*4	^*4	^*4
256KB 20KB								^*2	^*2	^*2	^*2	^*2	^*2	^*2	^*2	^*2	^*2	^*2	^24
192KB 16KB																			^*4
128KB 12KB
96KB 8KB
64KB 4KB	^*1	^*1	^*1	^*1	^*1	^*1	^*1	^*1	^*1	^*1	^*1	^*1	^*1	^*1
48KB 3KB
32KB 2KB
16KB 2KB
16KB 1.5KB
12KB 1KB
8KB 768B
4KB 512B
2KB 256B

RL78/G12
RL78/G13

*1 : 3KB available when the self-programing function is used.
*2 : 19KB available when the self-programing function is used.
*3 : 31KB available when the self-programing function is used.
*4 : -40 to 105℃ products do not exist.

Block Diagram:

You can find an explanation of orderable part numbers here.

Resources for Software and Hardware

Title	Description
My Renesas	Create a My Renesas account to use our tool download services, receive e-newsletter/update notifications, and take advantage of our other services.
e-learning	Information for studying and learning about microcontrollers and microprocessors.
FAQ	Frequently asked questions and useful hints for development.
Forum	A forum and community site to share technical information, questions and opinions with others who use Renesas products.

Software Design Support

Title	Description
CS+	An integrated development environment that can be used for coding, assembling/compiling, and simulation. (Also included with Renesas Starter Kits.)
e² studio	Renesas eclipse embedded studio, known as e² studio, is a complete development and debug environment based on the popular Eclipse CDT project.
E1	A standard Renesas on-chip debugging emulator that enables users to carry out ample debugging for real development at low cost. (Also included with starter kits.)
Renesas Starter Kit	All the development tools you need for MCU evaluation and getting started. Also recommended for training.

Hardware Design Support

Title	Description
IBIS	IBIS standard simulation data is required for high-speed board design and can be used to run simulations to examine and troubleshoot issues such as waveform reflection, ringing, and so on, before producing the actual board.
Characteristics data	Information on observed values. Please use this as reference data when developing your set.
Oscillation circuit characteristics	The resonators for which the operation is verified and their oscillator constants are shown below.

You can filter the sample codes and application notes that are displayed using the below filters.

Back

Confirm below disclaimers

Input Renesas account name and password

Disclaimer:

The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.

Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.

My Account