The ZSSC5101 is a CMOS integrated circuit for converting sine and cosine signals obtained from magnetoresistive bridge sensors into a ratiometric analog voltage with a user-programmable range of travel and clamping levels. The ZSSC5101 accepts sensor bridge arrangements for both rotational as well as linear movement. Depending on the type of sensor bridge, a full-scale travel range of up to 360 mechanical degrees can be obtained. Programming of the device is performed through the output pin, allowing in-line programming of fully assembled 3-wire sensors. Programming parameters are stored in an EEPROM and can be re-programmed multiple times. The ZSSC5101 is fully automotive-qualified with an ambient temperature range up to 150°C for SSOP-14 or 160°C for die.

特性

  • Ratiometric analog output
  • Up to 4608 analog steps
  • Step size as small as 0.022°
  • Programming through output pin via one-wire interface
  • Offset and amplitude calibration of the bridge input signals
  • Programmable linear transfer characteristic: zero position, angular range, upper and lower clamping levels, rising or falling slope
  • Loss of magnet indication with programmable threshold level
  • Accepts anisotropic, giant, and tunnel magnetoresistive bridge sensors (AMR, GMR and TMR)
  • Programmable 32-bit user ID
  • CRC, error detection, and error correction on EEPROM data
  • Diagnostics: broken-wire detection
  • Automotive-qualified to AEC-Q100, grade 0

产品选择

下单器件型号 Part Status Pkg. Type Lead Count (#) Temp. Range Carrier Type Buy Sample
ZSSC5101BE1C
Active WAFER 0 -40 to 160°C Wafer
Availability
ZSSC5101BE4R
Active SSOP 14 -40 to 160°C Reel
Availability
ZSSC5101BE4T
Active SSOP 14 -40 to 160°C Tube
Availability
ZSSC5101BE1B
Active WAFER 0 -40 to 160°C Wafer
Availability
ZSSC5101BE2B
Active WAFER 0 -40 to 160°C Wafer
Availability
ZSSC5101BE3B
Active WAFER 0 -40 to 160°C Wafer
Availability

文档和下载

文档标题 其他语言 类型 文档格式 文件大小 日期
数据手册与勘误表
ZSSC5101 Short-form Datasheet 简易格式数据手册 PDF 196 KB
ZSSC5101 Datasheet 数据手册 PDF 724 KB
使用指南与说明
IDT CAD Altium Libraries for AID Products Rev 20160819 指南 ZIP 1.20 MB
ZSSC5101 Evaluation Kit Description 手册 PDF 906 KB
应用指南 &白皮书
IDT Wafer Dicing Guidelines 应用文档 PDF 144 KB
下载
ZSSC5101 Evaluation Kit Software Rev. 1.0 软件 ZIP 25.98 MB
其他
Choosing the Right Sensor Signal Conditioning IC 其它参数 PDF 300 KB

Boards & Kits

器件号 文档标题 类型 公司
ZSSC5101KIT Evaluation Kit for ZSSC5101