NOTICE - The following device(s) are recommended alternatives:

The 813252I-02 is a PLL based synchronous multiplier that is optimized for PDH or SONET to Ethernet clock jitter attenuation and frequency translation. The device contains two internal frequency multiplication stages that are cascaded in series. The first stage is a VCXO PLL that is optimized to provide reference clock jitter attenuation. The second stage is a FemtoClock® frequency multiplier that provides the low jitter, high frequency Ethernet output clock that easily meets Gigabit and 10 Gigabit Ethernet jitter requirements. Pre-divider and output divider multiplication ratios are selected using device selection control pins. The multiplication ratios are optimized to support most common clock rates used in PDH, SONET and Ethernet applications. The VCXO requires the use of an external, inexpensive pullable crystal. The VCXO uses external passive loop filter components which allows configuration of the PLL loop bandwidth and damping characteristics. The device is packaged in a space-saving 32-VFQFN package and supports industrial temperature range.

特性

  • Two LVPECL outputs Each output supports independent frequency selection at 25MHz, 125MHz, 156.25MHz and 312.5MHz
  • Two differential inputs support the following input types: LVPECL, LVDS, LVHSTL, SSTL, HCSL
  • Accepts input frequencies from 8kHz to 155.52MHz including 8kHz, 1.544MHz, 2.048MHz, 19.44MHz, 25MHz, 77.76MHz, 125MHz and 155.52MHz
  • Attenuates the phase jitter of the input clock by using a lowcost pullable fundamental mode VCXO crystal
  • VCXO PLL bandwidth can be optimized for jitter attenuation and reference tracking using external loop filter connection
  • FemtoClock frequency multiplier provides low jitter, high frequency output
  • Absolute pull range: 50ppm
  • FemtoClock VCO frequency: 625MHz
  • RMS phase jitter @ 125MHz, using a 25MHz crystal (10kHz '- 20MHz): 1.3ps (maximum)
  • 3.3V supply voltage
  • -40°C to 85°C ambient operating temperature
  • Available inlead-free (RoHS 6) package

产品选择

下单器件 ID Part Status Type Lead Count (#) Temp. Grade Pb (Lead) Free Carrier Type Buy Sample
Obsolete 32 I 是的 Tray
Availability
Obsolete 32 I 是的 Reel
Availability

文档和下载

文档标题 其他语言 类型 文档格式 文件大小 日期
数据手册与勘误表
813252I-02 Datasheet 数据手册 PDF 569 KB
应用指南 &白皮书
AN-828 Termination - LVPECL 应用文档 PDF 322 KB
AN-831 The Crystal Load curve 应用文档 PDF 395 KB
AN-842 Thermal Considerations in Package Design and Selection 应用文档 PDF 495 KB
AN-840 Jitter Specifications for Timing Signals 应用文档 PDF 442 KB
AN-838 Peak-to-Peak Jitter Calculations 应用文档 PDF 115 KB
AN-839 RMS Phase Jitter 应用文档 PDF 233 KB
AN-836 Differential Input to Accept Single-ended Levels 应用文档 PDF 120 KB
AN-835 Differential Input with VCMR being VIH Referenced 应用文档 PDF 160 KB
AN-830 Quartz Crystal Drive Level 应用文档 PDF 143 KB
AN-827 Application Relevance of Clock Jitter 应用文档 PDF 1.15 MB
AN-815 Understanding Jitter Units 应用文档 PDF 565 KB
AN-802 Crystal-Measuring Oscillator Negative Resistance 应用文档 PDF 136 KB
AN-801 Crystal-High Drive Level 应用文档 PDF 202 KB
AN-806 Power Supply Noise Rejection 应用文档 PDF 438 KB
AN-805 Recommended Ferrite Beads 应用文档 PDF 121 KB
PCN / PDN
PDN# CQ-14-05 MARKET DECLINED PRODUCT DISCONTINUANCE NOTICE 产品停产通告 PDF 192 KB
PCN# : A1208-01R1 Gold to Copper Wire 产品变更通告 PDF 254 KB
Downloads
813252I-02 IBIS 模型 - IBIS ZIP 37 KB