ISL70001ASEH

Radiation Hardened and SEE Hardened 6A Synchronous Buck Regulator

Product Status: 量産中

OVERVIEW

The ISL70001ASEH is a radiation hardened and SEE hardened high-efficiency monolithic synchronous buck regulator with integrated MOSFETs. This single chip power solution operates over an input voltage range of 3V to 5.5V and provides a tightly regulated output voltage that is externally adjustable from 0.8V to ~85% of the input voltage. Output load current capacity is 6A for TJ < +145°C.

The ISL70001ASEH uses peak current-mode control for excellent output load transient response and features integrated compensation and switches at a fixed frequency of 1MHz to reduce component size and count. In application where two POLs are needed, two ISL70001ASEH devices can be synchronized 180° out-of-phase to reduce the overall input RMS ripple current. The internal synchronous power switches are optimized for high efficiency and good thermal performance

The ISL70001ASEH incorporates fault protection for the regulator. The protection circuits include input undervoltage, output undervoltage, and output overcurrent.

High integration and class leading radiation tolerance makes the ISL70001ASEH an ideal choice to power many of today’s small form factor applications. Two devices can be synchronized to provide a complete power solution for large scale digital ICs, like field programmable gate arrays (FPGAs), that require separate core and I/O voltages.

KEY FEATURES

  • ±1% reference voltage over line, load, temperature and radiation
  • Current mode control for excellent dynamic response
  • Full mil-temp range operation (TA = -55°C to +125°C)
  • 50% lower shutdown supply current than the ISL70001SEH
  • Available in a thermally enhanced heatsink package - R48.B
  • Highly efficient: 94% peak efficiency
  • Operates from 3V to 5.5V supply
  • Adjustable output voltage
    • Two external resistors set VOUT from 0.8V to ~85% of VIN
  • Bidirectional SYNC pin allows two devices to be synchronized 180° out-of-phase
  • Power-good output voltage monitor
  • Adjustable analog soft-start
  • Input undervoltage, output undervoltage and output overcurrent protection
  • Electrically screened to DLA SMD 5962-09225
  • QML qualified per MIL-PRF-38535 requirements
  • Radiation acceptance testing
    • HDR [50-300rad(Si)/s]: 100krad(Si)
    • LDR [<10mrad(Si)/s]: 50krad(Si)
  • SEE hardness (see SEE report for details)
    • SEL and SEB LETeff: 86.4MeV/mg/cm2 min
    • SEFI X-section (LETeff = 86.4MeV/mg/cm2): 1.4 x 10-6 cm2 max
    • SET LETeff (< 1 pulse perturbation): 86.4MeV/mg/cm2 min
  •  

     

    APPLICATIONS

  • FPGA, CPLD, DSP, CPU Core or I/O voltages
  • Low-voltage, high-density distributed power systems

PARAMETRICS

Parameters
ISL70001ASEH
Basic Information
Production Status
量産中
iSimモデル
YES
出力数
1
トポロジ [Rail 1]
Buck
入力電圧 (V) (min) [Rail 1]
3
入力電圧 (V) (max) [Rail 1]
5.5
出力電圧 (V) (min) [Rail 1]
0.6
出力電圧 (V) (max) [Rail 1]
85% x VIN
出力電流 (A) (max) [Rail 1]
6
IQ [Rail 1]
2mA
スイッチング周波数 (max) (MHz)
1
スイッチング周波数 (min) (MHz)
1
最大デューティサイクル (%)
90
ピーク効率 (%)
94
POR
Yes
SYNCH機能
Yes
制御方式
Current Mode
スイッチング周波数範囲 (MHz)
1 to 1
クラス
V, /PROTO
DLA SMD
5962-09225
高線量率 (HDR) krad (Si)
100
低線量率 (ELDRS) krad (Si)
100
SEL (MeV/mg/cm2)
86.4
SMD URL
認定レベル
QML Class V (space)
温度範囲
-55 to +125

ブロック図

Featured Evaluation Tools

ISL70005SEHEV2Z radiation hardened, 3A buck regulator and 1A source/sink LDO Evaluation Board

Evaluation Kit

ISL70005SEHEV2Z

ISL70005SEHEV2Z 評価ボードは、耐放射線特性をもつ3A降圧レギュレータ「ISL70005SEH」および1Aソース/シンクLDOの性能を評価するために設計されています。

ISL70005SEHDEMO1Z radiation hardened, 3A buck regulator and 1A source/sink LDO Demonstration Board

Demonstration Kit

ISL70005SEHDEMO1Z

ISL70005SEHDEMO1Z デモボードは、耐放射線特性をもつISL70005SEH、3A降圧レギュレータおよび1Aソース/シンクLDOの性能を実証するために設計されています。

下記をご確認ください