HIP4082

80V/1.25A Peak Current Full Bridge FET Driver

OVERVIEW

The HIP4082 is a medium frequency, medium voltage H-Bridge N-Channel MOSFET driver IC, available in 16 lead plastic SOIC (N) and DIP packages.

Specifically targeted for PWM motor control and UPS applications, bridge based designs are made simple and flexible with the HIP4082 H-bridge driver. With operation up to 80V, the device is best suited to applications of moderate power levels.

Similar to the HIP4081, it has a flexible input protocol for driving every possible switch combination except those which would cause a shoot-through condition. The HIP4082's reduced drive current allows smaller packaging and it has a much wider range of programmable dead times (0.1 to 4.5µs) making it ideal for switching frequencies up to 200kHz. The HIP4082 does not contain an internal charge pump, but does incorporate non-latching level-shift translation control of the upper drive circuits.

This set of features and specifications is optimized for applications where size and cost are important. For applications needing higher drive capability the HIP4080A and HIP4081A are recommended.

KEY FEATURES

  • Independently Drives 4 N-Channel FET in Half Bridge or Full Bridge Configurations
  • Bootstrap Supply Max Voltage to 95VDC
  • Drives 1000pF Load in Free Air at 50°C with Rise and Fall Times of Typically 15ns
  • User-Programmable Dead Time (0.1 to 4.5µs)
  • DIS (Disable) Overrides Input Control and Refreshes Bootstrap Capacitor when Pulled Low
  • Input Logic Thresholds Compatible with 5V to 15V Logic Levels
  • Shoot-Through Protection
  • Undervoltage Protection
  • Pb-free Available

PARAMETRICS

Parameters
HIP4082
Basic Information
Production Status
量産中(*)
最大ブートストラップ電源電圧 (V)
95
VBIAS (V) (max)
15
ピークプルアップ電流
1.4 A
ピークプルダウン電流
1.3 A
ターンオン伝播遅延 (ns)
75
ターンオフ伝播遅延 (ns)
55
立ち上がり時間
9 ns
立ち下がり時間
9 ns
入力ロジックレベル
3.3V/TTL
チャージポンプ
No
認定レベル
Standard
CANサンプル
YES
温度範囲
-55 to +125

ブロック図

上記downloadには必ず下のボタンより契約内容を御確認ください。

MyRenesasボタンよりID,PWをご入力ください。