ISL9440B

Triple Step-Down PWM and Single Linear Controller with Programmable Soft-Start

OVERVIEW

The ISL9440B and ISL9440C are quad-output synchronous buck controllers that integrate three PWM controllers and one low drop-out linear regulator controller, which are full featured and designed to provide multi-rail power for use in products such as cable and satellite
set-top boxes, VoIP gateways, cable modems, and other home connectivity products as well as a variety of industrial and general purpose applications. Each output is adjustable down to 0.8V. The PWMs are synchronized at 180° out-of-phase thus, reducing the RMS input current and ripple voltage.

The ISL9440B and ISL9440C offer programmable soft-start, independent enable inputs for ease of supply rail sequencing, and integrated UV/OV/OC/OT protections in a space conscious 5mmx5mm QFN package. An early warning function is offered to output a logic signal to warn the system to back up data when input voltage falls below a certain level.

The ISL9440B and ISL9440C utilize internal loop compensation to keep minimum peripheral components for compact design and a low total solution cost. These devices are implemented with current mode control with feed-forward to cover various applications even with fixed internal compensations.

KEY FEATURES

  • Three Integrated Synchronous Buck PWM Controllers
  • Internal Bootstrap Diodes
  • Internal Compensation
  • Independent Control for each Regulator and Programmable Output Voltages; Independent Enable/Shutdown/Soft-start
  • Fixed Switching Frequency: 300kHz(B), 600kHz(C)
  • Adaptive Shoot-Through Protection on all Synchronous Buck Controllers
  • Pre-biased Output Start-up Capability
  • Out-of-Phase Switching to Reduce Input Capacitance (0°/180°/0°)
  • No External Current Sense Resistor
  • Uses Lower MOSFET's rDS(ON)
  • Current Mode Controller with Voltage Feed-Forward
  • Complete Protection
  • Overcurrent, Overvoltage, Undervoltage Lockout, Over-Temperature
  • Cycle-by-Cycle Current Limiting
  • Wide Input Voltage Range
  • Input Rail Powers VIN Pin: 5.6V to 24V
  • Input Rail Powers VCC_5V Pin (VIN tied to VCC_5V, for 5V input applications): 4.5V to 5.6V
  • Early Warning on Input Voltage Failure
  • Integrated Reset Function
  • Pb-Free (RoHS Compliant)

PARAMETRICS

Parameters
ISL9440B
Basic Information
Production Status
量産中
出力数
4
入力電圧 (V) (min)
4.5
入力電圧 (V) (max)
24
出力電圧 (V) (min)
0.8
出力電圧1 (V) (max)
24
出力電流1 (A) (max)
0.8
スイッチング周波数 (kHz)
300
バイアス電圧 (VCC) (V)
5
出力電流2 (A) (max)
24
出力電圧2 (V) (max)
Adj.
出力電圧3 (V) (max)
Adj.
リニア出力
Yes
DDR対応
No
認定レベル
Standard
バイアス電圧範囲 (V)
5
CANサンプル
YES
温度範囲
-40 to +85

上記downloadには必ず下のボタンより契約内容を御確認ください。

MyRenesasボタンよりID,PWをご入力ください。