ISL8702

Adjustable Quad Sequencer

OVERVIEW

The ISL8700, ISL8701, ISL8702 family of ICs provide four delay adjustable sequenced outputs while monitoring an input voltage all with a minimum of external components.

High performance DSP, FPGA, µP and various subsystems require input power sequencing for proper functionality at initial power-up and the ISL870X provides this function while monitoring the distributed voltage for over and undervoltage compliance.

The ISL8700 and ISL8701 operate over the +2.5V to +24V nominal voltage range, whereas the ISL8702 operates over the 2.5V to +12V range. All three have a user adjustable time from UV and OV voltage compliance to sequencing start via an external capacitor when in auto start mode and adjustable time delay to subsequent ENABLE output signal via external resistors.

Additionally, the ISL8702 provides an input for sequencing on and off operation (SEQ_EN) and for voltage window compliance reporting (FAULT) over the +2.5V to +12V voltage range.

Easily daisy chained for more than 4 sequenced signals.

Altogether, the ISL870X provides these adjustable features with a minimum of external BOM. See Figure 1 for typical implementation.

KEY FEATURES

  • Adjustable Delay to Subsequent Enable Signal
  • Adjustable Delay to Sequence Auto Start
  • Adjustable Distributed Voltage Monitoring
  • Under and Overvoltage Adjustable Delay to Auto Start Sequence
  • I/O Options
  • ENABLE (ISL8700, ISL8702) and ENABLE# (ISL8701) SEQ_EN (ISL8702)
  • Voltage Compliance Fault Output
  • Pb-Free (RoHS Compliant)

PARAMETRICS

Parameters
ISL8702
Basic Information
Production Status
量産中
VBIAS (min)
2.5 V
VBIAS (V) (max)
12
シーケンス電圧 (min)
2.5 V
シーケンス電圧 (max)
12 V
イネーブル
Active High
ロジックレベル
TTL
初期起動要件
UV/OV & EN
監視入力
1
シーケンス出力制御
Active High, Open Drain
VINが不適合な場合にオフになるチャネル数
4 Simultaneous
プリセット/調整可能シーケンス
Preset Order, Adjustable Delay
特長
Fault Reporting
パワーダウンシーケンス
Yes
認定レベル
Standard
シーケンス電圧範囲 (V)
2.5 to 12
バイアス電圧範囲 (V)
2.5 to 12
温度範囲
-40 to +85

上記downloadには必ず下のボタンより契約内容を御確認ください。

MyRenesasボタンよりID,PWをご入力ください。