ISL9241

Buck-Boost Configurable Battery Charger with SMBus Interface and USB Power Delivery

Product Status: 量産中

OVERVIEW

The ISL9241 is a digitally configurable buck-boost battery charger that can support both Narrow Voltage Direct Charging (NVDC) and Hybrid Power Buck Boost (HPBB/Bypass) charging and switch between the modes using firmware control. Bypass mode is also supported using a controller’s firmware, allowing the adapter to provide power directly to the system. The ISL9241 provides the charging function, system bus regulation, and protection features using only NFETs for tablet, ultrabook, and notebook platforms. The advanced Renesas R3™ technology provides a high, light-load efficient Charging mode. The ISL9241 takes input power from a wide range of DC power sources (conventional AC/DC charger adapters, USB Type-C Power ports, travel adapters, etc.) and safely charges battery packs with up to 4-series cell Li-ion batteries.

The system power can be provided from the adapter, battery, or a combination of both. The charger’s reconfigurable internal registers allow the use of a smaller inductor for the HPBB mode to achieve higher efficiencies across multiple power levels. The ISL9241 can operate with only a battery, only an adapter, or both connected. For Intel IMVP compliant systems, the ISL9241 includes System Power monitor (PSYS) functionality, which provides an analog signal representing total platform power. The PSYS output connects to a wide range of IMVP core regulators to provide an IMVP compliant power domain function. The ISL9241 supports reverse buck, boost, or buck-boost operation to the adapter port (OTG mode) from 2- to 4-cell batteries. This allows configurations to support USB-C Power Delivery (PD) output for Programmable Power Supply (PPS) ports. The ISL9241 serial communication uses SMBus/I2C, which allows programming of many key parameters to deliver a customized solution.

KEY FEATURES

    • Buck-boost NVDC or hybrid power (turbo boost) charger for 2-, 3-, or 4-cell Li-ion batteries using all NFET transistors
    • Input voltage range: 3.9V to 23.4V (no dead zone)
    • System/battery output voltage: 3.9V to 18.304V
    • Bypass mode supported, to connect system to adapter
    • Autonomous charging option (automatic end of charging)
    • Adapter current and battery current monitor (AMON/BMON)
    • PROCHOT# open-drain output, IMVP compliant
    • System power monitor PSYS output, IMVP8/9 compliant
    • Internal 8-bit ADC for monitoring key parameters
    • USB-C PD Fast Role Swap support and PPS support
    • Independent compensation pins for forward and reverse operation (OTG) modes
    • Supports supplemental power (Intel VMIN active protection)
    • Battery Ship mode - IC ultra-low power state
    • Supports JEITA compliance using an NTC
    • 4 x 4 32 Ld TQFN package

PARAMETRICS

Parameters
ISL9241
Basic Information
Production Status
量産中
入力電圧 (V) (min)
3.9
入力電圧 (V) (max)
23.4
バッテリ充電電圧 (V)
3.9 to 18.304
充電電圧精度 (%) (max)
±0.5
バッテリ充電電圧調整 (%)
8mV steps
充電電流制限精度 (%)
±3
トリクル充電電流制限精度 (%)
64mA, 96mA, 128mA, 160mA, 192mA, 224mA, or 256mA
自動電源選択
Yes
DCアダプタ検出
Yes
トポロジ
R3 modulator
スイッチング周波数 (kHz) (Typ.)
600 to 1420
最大デューティサイクル (%)
100
可聴ノイズ
No
サーマルシャットダウン (°C)
150 °C
バッテリケミストリ
Multi-Cell Li+/Polymer
認定レベル
Standard
入力電圧範囲 (V)
3.9 to 23.4
CANサンプル
YES

ブロック図

下記をご確認ください