ISL3295E

±16.5kV ESD Protected, SOT-23, 20Mbps, RS-485/RS-422 Transmitter

Product Status: 量産中

OVERVIEW

The Intersil ISL3293E, ISL3294E, ISL3295E, ISL3296E, ISL3297E, ISL3298E are ±16.5kV HBM ESD Protected (7kV IEC61000 contact), 3.0V to 5.5V powered, single transmitters for balanced communication using the RS-485 and RS-422 standards. These drivers have very low bus currents (±40mA), so they present less than a “1/8 unit load” to the RS-485 bus. This allows more than 256 transmitters on the network without violating the RS-485 specification’s 32 unit load maximum, and without using repeaters.

Hot Plug circuitry ensures that the Tx outputs remain in a high impedance state while the power supply stabilizes.

The ISL3293E, ISL3294E, ISL3296E, ISL3297E utilize slew rate limited drivers which reduce EMI, and minimize reflections from improperly terminated transmission lines, or from unterminated stubs in multidrop and multipoint applications. Drivers on the ISL3295E and ISL3298E are not limited, so they can achieve the 20Mbps data rate. All versions are offered in industrial and extended industrial (-40°C to +125°C) temperature ranges.

A 26% smaller footprint is available with the ISL3296E, ISL3297E, ISL3298E’s TDFN package. These devices also feature a logic supply pin (VL ) that sets the switching points of the DE and DI inputs to be compatible with a lower supply voltage in mixed voltage systems.

For companion single RS-485 receivers in micro packages, please see the ISL3280E, ISL3281E, ISL3282E, ISL3283E, ISL3284E datasheet.

KEY FEATURES

  • High ESD protection on RS-485 outputs: ±16.5kV HBM
  • IEC61000-4-2 contact test method: ±7kV
  • Class 3 ESD level on all other pins: >8kV HBM
  • Specified for +125°C operation (VCC ≤ 3.6V only)
  • Logic supply pin (VL) eases operation in mixed supply systems (ISL3296E through ISL3298E only)
  • Hot plug - Tx outputs remain three-state during power-up
  • Low Tx leakage allows >256 devices on the bus
  • High data rates: up to 20Mbps
  • Low quiescent supply current: 150µA (max)
  • Very low shutdown supply current: 1µA (max)
  • -7V to +12V common-mode output voltage range (VCC ≤ 3.6V only)
  • Current limiting and thermal shutdown for driver overload protection (VCC ≤ 3.6V only)
  • Tri-statable Tx outputs
  • 5V tolerant logic inputs when VCC ≤5V
  • Pb-free (RoHS compliant)

PARAMETRICS

Parameters
ISL3295E
Basic Information
Production Status
量産中
主な特長
High Speed
Tx数
1
バス上の許容デバイス数
256
半二重/全二重
N/A
高ESD保護
Yes-IEC61000
ホットプラグ
Yes
データレート
20 Mbps
電源電圧Vcc (V) (min)
3
電源電圧Vcc (V) (max)
5.5
スルーレート制限
No
Tx/Rxイネーブル
Yes
IS イネーブル/ディセーブル
120 µA
SHDN ICC
0.01 µA
VLピン
No
認定レベル
Standard
電源電圧Vcc範囲 (V)
3.0 to 5.5
CANサンプル
YES
温度範囲
-40 to +125

ブロック図

下記をご確認ください