概要

Description

The ISL32490E, ISL32492E, ISL32493E, ISL32495E, ISL32496E, and ISL32498E are fault protected, 5V powered, differential transceivers that exceed the RS-485 and RS-422 standards for balanced communication. The RS-485 transceiver pins (driver outputs and receiver inputs) are fault protected up to ±60V and are protected against ±16. 5kV ESD strikes without latch-up. Additionally, the extended Common-Mode Range (CMR) allows these transceivers to operate in environments with common-mode voltages up to ±25V (>2x the RS-485 requirement), making this fault protected RS-485 family one of the most robust on the market. The transmitters (Tx) deliver an exceptional 2. 5V (typical) differential output voltage into the RS-485 specified 54Ω load. This yields better noise immunity than standard RS-485 ICs, or allows up to six 120Ω terminations in star network topologies. The receiver (Rx) inputs feature a full fail-safe design that ensures a logic high Rx output if the Rx inputs are floating, shorted, or on a terminated but undriven (idle) bus. The Rx outputs have high drive levels; typically, 15mA at VOL = 1V (for opto-coupled, isolated applications). Half duplex (Rx inputs and Tx outputs multiplexed together) and full duplex pinouts are available. See Table 1 on page 3 for key features and configurations by device number. For fault protected or wide common-mode range RS-485 transceivers with cable invert (polarity reversal) pins, see the ISL32483E datasheet.

特長

  • Fault protected RS-485 bus pins: up to ±60V
  • Extended CMR: ±25V (more than twice the range required for RS-485)
  • ±16.5kV HBM ESD protection on RS-485 bus pins
  • 1/4 unit load for up to 128 devices on the bus
  • High transient overvoltage tolerance: ±80V
  • Full fail-safe (open, short, terminated) RS-485 receivers
  • High Rx IOL for opto-couplers in isolated designs
  • Hot plug circuitry; Tx and Rx outputs remain three-state during power-up/power-down
  • Choice of RS-485 data rates: 250kbps to 15Mbps
  • Low quiescent supply current: 2.3mA
  • Ultra low shutdown supply current: 10μA

アプリケーション

アプリケーション

  • Utility Meters/Automated Meter Reading Systems
  • High Node Count RS-485 Systems
  • PROFIBUS™ and RS-485 Based Field Bus Networks, and Factory Automation
  • Security Camera Networks
  • Building Lighting and Environmental Control Systems
  • Industrial/Process Control Networks

ドキュメント

タイトル 分類 日付
PDF1.42 MB
データシート
PDF1023 KB
アプリケーションノート
PDF207 KB
アプリケーションノート
PDF474 KB
アプリケーションノート
PDF178 KB
アプリケーションノート
PDF513 KB
アプリケーションノート
PDF826 KB
アプリケーションノート
PDF443 KB
アプリケーションノート
PDF582 KB
アプリケーションノート
PDF440 KB
アプリケーションノート
PDF338 KB
アプリケーションノート
PDF365 KB
アプリケーションノート
PDF375 KB
アプリケーションノート
PDF559 KB
アプリケーションノート
PDF5.10 MBEnglish
カタログ
PDF156 KB
その他
PDF253 KB
その他
PDF254 KB
その他
PDF208 KB
Price Increase Notice
PDF266 KB
製品変更通知
PDF545 KB
製品変更通知
PDF152 KB
製品変更通知
PDF117 KB
製品変更通知
PDF300 KB
技術概要
PDF246 KB
ホワイトペーパー

設計・開発

モデル

モデル

Title Type Date
IBS27 KB
モデル-IBIS