ISL95810

Single Digitally Controlled Potentiometer (XDCP™)

Product Status: 量産中

OVERVIEW

The ISL95810 integrates a digitally controlled potentiometer (XDCP) on a monolithic CMOS integrated circuit.

The digitally controlled potentiometer is implemented with a combination of resistor elements and CMOS switches. The position of the wiper is controlled by the user through the I2 C bus interface. The potentiometer has an associated volatile Wiper Register (WR) and a non-volatile Initial Value Register (IVR), that can be directly written to and read by the user. The content of the WR controls the position of the wiper. At power-up the device recalls the contents of the DCP's IVR to the WR.

The DCP can be used as three-terminal potentiometer or as two-terminal variable resistor in a wide variety of applications including control, parameter adjustments, and signal processing.

KEY FEATURES

  • 256 resistor taps - 0.4% resolution
  • I2C serial interface
  • Wiper resistance: 70Ω typical @ 3.3V
  • Non-volatile storage of wiper position
  • Standby current 5µA max
  • Power supply: 2.7V to 5.5V
  • 50kΩ, 10kΩ total resistance
  • High reliability
  • Endurance: 200,000 data changes per bit per register
  • Register data retention: 50 years @ T ≤ +75°C
  • 8 Ld MSOP and 8 Ld TDFN packaging
  • Pb-free plus anneal available (RoHS compliant)

PARAMETRICS

Parameters
ISL95810
Basic Information
Production Status
量産中
チャネル当たりのデバイス数
1
タップ数
256
メモリタイプ
Nonvolatile
バス/出力インタフェース
I2C
抵抗オプション (kΩ)
10, 50
電源電圧Vcc (V) (min)
2.7
電源電圧Vcc (V) (max)
5.5
電源電流Icc
5 µA
抵抗変化特性
Linear
VL端子電圧 (min)
0 V
VL端子電圧 (max)
5.5 V
ワイパ電流 (mA)
3
ワイパ抵抗 (Ω)
70
二電源範囲 (V)
N/A
最大動作温度
85 °C
エンドツーエンド温度係数 (ppm/øC)
45
中間点レシオメトリック温度係数
4
特長
Same as ISL90810 with memory
認定レベル
Standard
単一電源範囲 (V)
0 to 5.5
電源電圧Vcc範囲 (V)
2.7 to 5.5
CANサンプル
YES
温度範囲
-40 to +85

ブロック図

下記をご確認ください