ISL95311

Digitally Controlled Potentiometer (XDCP™)

Product Status: 量産中

OVERVIEW

Terminal Voltage 0V to 13.2V, 128 Taps I2 C Interface

The Intersil ISL95311 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by an I2 C interface. The potentiometer is implemented by a resistor array composed of 127 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The wiper of the potentiometer has an associated volatile Wiper Counter Register (WR) and a non-volatile Initial Value Register (IVR) that can be directly written to and read by the user. The contents of the WR controls the position of the wiper on the resistor array through the switches. At power-up, the device recalls the contents of the IVR to the corresponding WR.

The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications, including:
  • LCD contrast control
  • Parameter and bias adjustments
  • Industrial and automotive control
  • Mechanical pot replacement

KEY FEATURES

  • Non-volatile solid-state potentiometer
  • I2C serial interface
  • DCP terminal voltage, 0V to +13.2V
  • 128 wiper tap points - 0.8% resolution
  • Wiper position stored in nonvolatile memory and recalled on power-up
  • 127 resistive elements
  • Temperature compensated
  • Low wiper resistance 70Ω typical @ 3.3V
  • Low power CMOS
  • Standby current, 2µA @ VCC = +3.6V
  • High reliability
  • Endurance, 200,000 data changes per bit
  • Register data retention 50 years @ T < 75°C
  • RTOTAL values = 10kΩ, 50kΩ
  • 10 Ld MSOP package
  • Pb-free available (RoHS compliant)

PARAMETRICS

Parameters
ISL95311
Basic Information
Production Status
量産中
チャネル当たりのデバイス数
1
タップ数
128
メモリタイプ
Nonvolatile
バス/出力インタフェース
I2C
抵抗オプション (kΩ)
10
電源電圧Vcc (V) (min)
2.7
電源電圧Vcc (V) (max)
5.5
電源電流Icc
5 µA
抵抗変化特性
Linear
VL端子電圧 (min)
0 V
VL端子電圧 (max)
13.2 V
ワイパ電流 (mA)
3
ワイパ抵抗 (Ω)
70
二電源範囲 (V)
8 to 13.2
最大動作温度
85 °C
エンドツーエンド温度係数 (ppm/øC)
45
中間点レシオメトリック温度係数
4
特長
Dual supply required to obtain terminal voltage higher than Vcc
認定レベル
Standard
単一電源範囲 (V)
0 to 13.2
電源電圧Vcc範囲 (V)
2.7 to 5.5
サンプル提供
YES
温度範囲
-40 to +85

ブロック図

下記をご確認ください