ISL97691

2.4V LED Driver with Independent Analog and PWM Dimming Controls of 2 Backlights for 3D Application

Product Status: 量産中

OVERVIEW

The ISL97691 is Intersil’s highly integrated 4 channel LED driver for single cell Li-Ion battery operated mobile displays requiring analog dimming, and for 3D mobile display applications. It drives four 40mA channels of LEDs up to 26V from an input supply 2.4V to 5.5V. The ISL97691 will also drive 60mA channels up to 21V at 30% duty for high peak current 3D modes.

The ISL97691 provides 4 channels of current with 2 independent analog dimming controls and 2 independent PWM dimming controls. Channels 1 and 2 form one channel group and channels 3 and 4 form the other channel group. Each channel group’s analog dimming is controlled through 1-Wire communication with 6-bit resolution and each channel group’s PWM dimming is controlled by a separate PWM input. This unique setup allows 2D or 3D application where independent and dynamic channel control of LED peak current and PWM dimming duty cycle are possible. The ISL97691 employs adaptive boost architecture that allows ultra low dimming duty cycle as low as 0.005% at 100Hz dimming frequency.

The driver features dynamic headroom control that monitors the highest LED forward voltage string and uses its feedback signal for the minimum output regulation.

The ISL97691 incorporates extensive protection functions including string open and short circuit detections, OVP, and OTP. The switching frequency can be adjusted from 400kHz to 1.5MHz. The device is offered in a 16 Ld TQFN 3x3mm package and can operate in ambient temperature from -40°C to +85°C.

KEY FEATURES

  • 2.4V minimum input voltage, no need for higher voltage supplies
  • 4 x 60mA (Note 1) and 4 x 40mA (Note 2) LED current
  • 2 groups of independent analog and pwm current controls
  • 1-wire interfaces for 6-bit analog dimming
  • PWM inputs for PWM dimming
  • 0.005% minimum PWM dimming duty cycle at 100Hz
  • Low 0.8mA quiescent current
  • ±2.5% current matching
  • Adjustable switching frequency from 400kHz to 1.5MHz
  • Fault protection
  • OVP, OTP, channel open/short circuit protections

    NOTES:
    1. Not exceeding 30% of the frame rate (1/tFRAME), with VIN > 2.7V and TA < +55°C
    2. VIN > 2.7V

PARAMETRICS

Parameters
ISL97691
Basic Information
Production Status
量産中
チャネル当たりのデバイス数
4
DC/DC照明用全電流 (mA)
240
出力電流/チャネル (mA) (max)
60
出力電圧 (V) (max)
21
輝度調節
Yes
入力電圧 (V) (max)
5.5
入力電圧 (V) (min)
2.4
LCD用バックライトサイズ (インチ) (min)
0
LCD用バックライトサイズ (インチ) (max)
17
認定レベル
Standard
ピーク効率 (%)
90
LED数 (max)
4-channel 21V 60mA LED Driver
周波数
400kHz to 1.5 MHz
IQ (max)
1 mA
ISW (mA) (Typ.)
2800
集積ダイオード
No
過電圧保護
Yes
故障スイッチ
Yes
トポロジ
Inductor Boost
入力電圧範囲 (V)
2.4 to 5.5
LCD用バックライトサイズ
Up to 17
CANサンプル
YES
温度範囲
-40 to +85

ブロック図

下記をご確認ください