ISL15102

Single Port, PLC Differential Line Driver

Product Status: 量産中

OVERVIEW

The ISL15102 is a single port differential line driver developed for Power Line Communication (PLC) applications. The device is designed to drive heavy line loads while maintaining a high level of linearity required in Orthogonal Frequency Division Multiplexing (OFDM) PLC modem links.

The ISL15102 has a disable control pin (DIS). In Disable mode, the line driver goes into Low Power mode and the outputs maintain a high impedance in the presence of high receive signal amplitude, improving TDM receive signal integrity.
The ISL15102 has built-in thermal protection. When the internal temperature reaches +150°C (typical) the driver shuts down to prevent damage to the device.

An internal input CM buffer maximizes the dynamic range and reduces the number of external components in the application circuit.

The ISL15102 is supplied in a thermally-enhanced small footprint (4mmx5mm) 24 Ld QFN package. The ISL15102 is specified for operation across the -40°C to +85°C operating ambient temperature range.

KEY FEATURES

  • Single differential driver
  • Internal VCM
  • 90MHz signal bandwidth
  • 900V/μs slew rate
  • Single +8V to +28V supply, absolute maximum 30V
  • Supports narrowband and broadband DMT PLC
  • -86dB THD at 200kHz in to 50Ω line load
  • -70dB THD at 3MHz in to 50Ω line load
  • Control pin for enable/disable for TDM operation
  • Thermal shutdown

PARAMETRICS

Parameters
ISL15102
Basic Information
Production Status
量産中
帯域幅 (MHz)
90
チャネル当たりのデバイス数
1
スルーレート (V/μs)
900
VS (min)
8 V
VS (max)
28 V
IS (per amp)
21 mA
IBIAS
±3 µA
最大オフセット電圧
±17 mV
IOUT
0.75 A
IOUT @ RL
0.2A @ 50Ω
VOUT (V)
20
レールツーレール入力
No
レールツーレール出力
No
サーマルシャットダウン
Yes
イネーブル
Yes
認定レベル
Standard
サンプル提供
YES
温度範囲
-40 to +85

ブロック図

下記をご確認ください