Image
High Speed Narrow Band Power Line Communication Modem IC
Jump to Page Section:
Back to top
Explore ECAD Models
Overview
R9A06G061 is a narrow-band power line communication modem IC that consists of analog front-end (AFE), DSP, and MCU. The high-performance DSP performs OFDM modulation and demodulation signal processing (PHY layer), and the MCU handles protocol conversion to/from the host interface. R9A06G061 enables high-speed and stable long-distance communication Peer-to-Peer (P2P) networks. Especially, R9A06G061 has improved direct drive capability in order to expand its use in DC power supply system applications.
- High-performance DSP
- Handle PHY layer, etc. of power line communication
- Maximum operating frequency: 276MHz
- IRAM: 128KB, DRAM: 128KB
- Dedicated instructions for Viterbi and Reed Solomon processing, AES128 encryption/decryption processing, and others
- MCU (Arm® Cortex®-M0+)
- Handle protocol conversion processing for the external MCU interface etc.
- Maximum operating frequency: 92MHz
- RAM: 32KB
- CRC operation hardware core
- Equipped with analog front-end (AFE) circuit
- External IOs
- UART (1ch), SPIs (1ch), Serial Flash IF (Single/Dual)
- Clock Output
- Built-in regulator: 3.3V input, 1.15V DC/DC converter
- Supply voltage: 3.3V
- PKG: 40-pin QFN 6mm x 6mm, 0.5mm pitch
- Operating temperature: -40 °C to +85 °C
- Smart building
- Power monitoring/demand control
- Environmental monitoring
- HVAC
- Fire & safety
- Lighting equipment control
- Solar power system
- Submersible pump
- Multifunction printer
Design & Development
Boards & Kits
CPX4 DC-PLC Evaluation Kit M01D1
This product is an evaluation kit for DC-based power line communication for developing software and evaluating systems compatible with Renesas' PLC modem IC R9A06G061. This product is a complete evaluation platform comprising the analog front end and control MCU required for DC power line communication.
To evaluate PLC communication using this product, the PHY Performance Evaluation Tool: SimpleMAC GUI is required.
CPX4 AC-PLC Evaluation Kit M02D2
This product is an evaluation kit for AC power line communication for developing software and evaluating systems compatible with Renesas' PLC modem IC R9A06G061. This product is a complete evaluation platform comprising the analog front end and control MCU required for AC power line communication.
To evaluate PLC communication using this product, the PHY Performance Evaluation Tool: SimpleMAC GUI is required.
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.
Product Options
