Overview

Description

The IDT1893AF is a lower cost, re-packaged version of the IDT1893Y-10. The IDT1893AF is a fully integrated, Physical Layer device (PHY) that is compliant with both the 10Base-T and 100Base-TX CSMA/CD Ethernet Standard, ISO/IEC 8802-3. The IDT1893AF uses the same proven silicon as the IDT1893Y-10 but offers a lower cost solution by using a lower cost 300 mil. 48-lead SSOP package. The IDT1893AF uses the same twisted-pair transmit and receive circuits as the IDT1893Y-10, and the same recommended board layout techniques apply to the IDT1893AF. The IDT1893AF is intended for Node applications using the standard MII interface to the MAC.

Features

  • Single 3.3V power supply
  • Supports category 5 cables with attenuation in excess of 24dB at 100 MHz.
  • DSP-based baseline wander correction to virtually eliminate killer packets
  • Low-power, 0.35-micron CMOS (typically 400 mW)
  • Single-chip, fully integrated PHY provides PCS, PMA, PMD, and AUTONEG sublayers of IEEE standard
  • 10Base-T and 100Base-TX IEEE 802.3 compliant
  • Clock or crystal supported
  • Media Independent Interface (MII) supported
  • Managed or Unmanaged Applications
  • 10M or 100M Half and Full Duplex Modes
  • Auto-Negotiation with Parallel detection for Legacy products
  • Fully integrated, DSP-based PMD includes:
  • – Adaptive equalization and baseline wander correction– Transmit wave shaping and stream cipher scrambler– MLT-3 encoder and NRZ/NRZI encoderLoopback mode for Diagnostic Functions
  • Small footprint 48-pin 300 mil SSOP package.
  • Available in Industrial Temperature and Lead Free packaging.

Comparison

Applications

Documentation

Type Title Date
Datasheet PDF 1.20 MB
End Of Life Notice PDF 550 KB
End Of Life Notice PDF 547 KB
Product Change Notice PDF 361 KB
4 items

Design & Development

Models