概览

描述

The F2480 is a 400MHz to 3000MHz RF Analog Variable Gain Amplifier (AVGA) that can be used in receivers, transmitters and other applications. Either the amplifier or voltage variable attenuator (VVA) can be configured as the first stage in the cascade. The F2480 RF AVGA provides 12dB typical maximum cascade gain (no attenuation) with 4.3dB noise figure (amplifier as first stage) and 36dB gain adjustment designed to operate with a single +5V supply.  Nominally, the Zero-Distortion™ amplifier offers +41.5dBm output IP3 using 106mA of ICC. This device is packaged in a 5 x 5 mm, 32-TQFN with 50Ω single-ended RF input and RF output impedances for ease of integration into the signal-path lineup.

特性

  • 400MHz to 3000MHz (amplifier range)
  • 50MHz to 6000MHz (attenuator range)
  • 12dB typical cascaded max gain
  • 36dB continuous gain range
  • Excellent linearity +41.5dBm OIP3
  • Noise figure 4.3dB
  • ICC = 106mA, 1.2mA amplifier standby current 
  • Bi-directional attenuator RF ports
  • Positive amplifier gain slope vs. frequency to counteract system PCB loss
  • VMODE pin allows either positive or negative attenuation control response
  • Linear-in-dB attenuation characteristic 
  • 4 RF port pinout supporting multiple lineup configurations
  • 50Ω input and output impedances
  • Broadband, internally matched
  • 5 x 5 mm, 32-TQFN package

文档

文档标题 类型 日期
PDF4.06 MB
数据手册
PDF3.17 MB
应用文档
PDF2.19 MB
指南
PDF1.15 MB
概览
PDF382 KB
产品简述
PDF30 KB
产品变更通告
 

设计和开发

软件与工具

软件下载

文档标题 类型 日期
ZIP169.81 MB
软件和工具 - 软件
 

开发板与套件

开发板与套件

模型

支持

视频和培训

Constant Linearity (KLIN) RF Technology by IDT

IDT’s KLIN (constant linearlity) RF technology extends both OIP3 and output 1 dB compression point (P1dBO) amplifier gain settings. This is particularly valuable in transmitter designs where the gain of the device is maintained within a normal gain setting window about 6 dB below maximum gain. 

KLIN refers to Constant High Linearity Inner Amplifiers as the gain is adjusted. This technology extends the compression performance over a wide range of input powers, and also extends output third order intercept and corresponding inner modulation distortion performance over a wide range of output powers.

This technology is particularly advantageous in transmitter designs, where the gain of the device is maintained within a normal gain setting window.

This technology applies to some of IDT's high-gain, high-linearity transmitter variable gain amplifiers (VGAs). For more information, visit: http://www.idt.com/products/rf-products/variable-gain-amplifiers-vga.

新闻和博客

Working to Achieve 5G Expectations 博客 2018年12月4日