The 89HT0816AP Retimer Evaluation Board is designed to enable quick in-system testing of IDT’s 8-lane, 8GTps, PCIe 3.0 Retimer IC product.
 
This board features an 8-lane PCIe connection from host through the Retimer to an end-point device installed in the 16-lane PCIe slot. The Evaluation Board is used by inserting it into a desktop PC or server, and then plugging an end point adapter card (SAS, Ethernet, graphics, etc.) into the 16-lane slot on top. Passive trace cards can be used to extend the data signals to emulate a planned system design. Note that the resulting card stack  requires an open chassis test environment.
 
I2C and JTAG interfaces are  provided for access to all receiver, transmitter, and other device configuration and status registers via IDT’s Configuration Utility GUI for Windows.  Software tools for signal eye capture are available. 

特性

  • Uses one 89HT0816AP PCIe3 Retimer
  • 8-lane PCIe adapter card with full PCIe protocol support, including all equalization procedure phases 0 – 3.
  • Configurable via I2C or JTAG interfaces using IDT Windows GUI
  • EEPROM supports automatic download of configuration data to the 89HT0816AP Retimer
  • Allows individual channel configuration
  • Switches define power-on initial state
  • Multiple power and clock connection options
  • Card format: 6.25” x 4.75”.  Note the non-standard form factor requires an open chassis
  • Works with passive trace cards to extend FR4 traces

产品选择

下单器件型号 Part Status Buy Sample
89KTT0816AP
Active
Availability

文档和下载

文档标题 其他语言 类型 文档格式 文件大小 日期
使用指南与说明
89HT0816AP Evaluation Board Manual 手册 - 评估板 PDF 694 KB
其他
89HT0816AP Evaluation Board Product Brief 产品简述 PDF 262 KB
89HT0816AP Evaluation Board Design File 其它参数 RAR 1.05 MB
89HT0816AP Evaluation Board Gerber File 其它参数 RAR 897 KB
89HT0816AP Evaluation Board Schematics 原理图 PDF 933 KB
89HT0816AP Evaluation Board BOM 其它参数 XLS 57 KB