The ISL29035 is an integrated ambient and infrared light-to-digital converter with I2C (SMBus compatible) Interface. Its advanced self-calibrated photodiode array emulates human eye response with excellent IR rejection. The on-chip ADC is capable of rejecting 50Hz and 60Hz flicker caused by artificial light sources. The Lux range select feature allows users to program the Lux range for optimized counts/Lux. For ambient light sensing, an internal 16-bit ADC has been designed based upon the charge-balancing technique. The ADC conversion time is nominally 105ms and is user adjustable from 11μs to 105ms, depending on oscillator frequency and ADC resolution. In normal operation, typical current consumption is 57μA. In order to further minimize power consumption, two power-down modes have been provided. If polling is chosen over continuous measurement of light, the auto power-down function shuts down the whole chip after each ADC conversion for the measurement. The other power-down mode is controlled by software via the I2C interface. The power consumption can be reduced to less than 0. 3μA when powered down. The ISL29035 supports a software brownout condition detection. The device powers up with the brownout bit asserted until the host clears it through the I2C interface. The ISL29035 supports a software and hardware interrupt that remains asserted until the host clears it through the I2C interface. Function of ADC conversion continues without stopping after interrupt is asserted. Designed to operate on supplies from 2. 25V to 3. 63V with an I2C supply from 1. 7V to 3. 63V, the ISL29035 is specified for operation across the -40°C to +85°C ambient temperature range.


  • Resolution: 16-bit ADC
  • Wide dynamic range: 1:4,200,000
  • Integrated noise reduction: 50/60Hz
  • Close to human eye response with excellent IR/UV rejection
  • Shutdown modes: software and automatic
  • Programmable interrupt threshold with persistence filter
  • Supply current (typical): 57μA
  • Shutdown current (maximum): 0.51μA
  • I2C (SMB compatible) power supply: 1.7V to 3.63V
  • Sensor power supply: 2.25V to 3.63V
  • Operating temperature range: -40°C to +85°C
  • Small form factor package: 6 Ld 1.5x1.6x0.75 ODFN


  • Mobile devices: smart phone, PDA, GPS
  • Computing devices: notebook PC, MacBook, tablets
  • Consumer devices: LCD-TV, digital camera
  • Industrial and medical light sensing


発注型名 Part Status Type Carrier Type 購入/サンプル
Active Reel


タイトル 他の言語 分類 形式 サイズ 日付
ISL29035 Datasheet データシート PDF 878 KB
ISL290xxiroz-evalz, ISL29xxxeval1z User Guide マニュアル PDF 1.74 MB
PCN15010 - Additional assembly facility of the listed Intersil ODFN packaged products 製品変更通知 PDF 76 KB
ISL29035EVAL1Z Design Files 設計ファイル ZIP 598 KB
Intersil ISL29xxx HID Installer v1.39 ライブラリ EXE 3.56 MB
Eye-Safety Exposure Calculator ソフトウェア/ツール-その他 XLSX 35 KB


製品名 タイトル 分類 会社名
ISL29035EVAL1Z Integrated Digital Light Sensor with Interrupt Evaluation Board 評価