Image
Takeo Mimura
Takeo Mimura
Senior Staff Engineer
Published: October 20, 2022

In this blog, we introduce the RA6T2 evaluation environment, which enables operation check of BLDC motors with inductive position sensor IC (IPS2200).

Two different RA6T2 evaluation kits are available as follows: (Figure 1)

Image
Evaluation environment for BLDC motor with inductive position sensor IC
Figure 1. Evaluation environment for BLDC motor with inductive position sensor IC

The discussed application note and sample projects are available for download from the RA6T2 product page. Equipped with the evaluation kit and sample projects, you can seamlessly begin evaluation of a BLDC motor with inductive position sensor as shown in the video below. The evaluation environment and sample projects are also summarized in the application note that can be downloaded from the RA6T2 product page.

From here, the inductive position sensor will be briefly introduced. An inductive position sensor is a non-contact sensor that uses electromagnetic induction to detect the position of a motor. The sensing element uses a coil pattern layout on a printed circuit board as shown in Figure 2, and the position of the motor can be detected when a metal plate passes over this sensing element. This position information is output as sine and cosine wave data via the inductive position sensor IC.

Image
Coil pattern layout on board and motor connection image
Figure 2. Coil pattern layout on board and motor connection image

The advantages of using this inductive position sensor include its functionality. The sensing element used in the inductive position sensor can be laid out with the same number of coil patterns as the pole pairs of the motor to be used (left side of Figure 3), so it can be adapted to a motor with various pole pairs. The coil substrate for the inductive position sensor can be mounted at the end or base of the shaft, providing high flexibility in designing motor machinery (right side of Figure 3). Furthermore, the inductive position sensor can be adapted to a variety of motors, but to improve positional accuracy, the coil substrate must be created to match the motor used. Renesas provides a support tool (Inductive Coil Design Tool Software) and 80 reference designs for developing this coil board. Please take advantage of these tools when developing your board.

Image
Inductive position sensor pole logarithm and layout example
Figure 3. Inductive position sensor pole logarithm and layout example

The second advantage is environmental durability. Since no magnets are used in the sensing element, it is highly resistant to surrounding magnetic fields and at the same time lightweight. In addition, the non-contact method provides high resistance to dust and dirt.

The last advantage is the low cost. In general, it’s easier to lower the total cost of inductive position sensors compared to optical or magnetic encoders, due to the number of elements and components used. The optical encoder sensor is inherently more expensive, while the magnetic encoder increased cost comes from the need for magnetic shielding, etc. Figure 4 compares the cost of the three position sensors.

Image
Comparison of cost for the three position sensors
Figure 4. Comparison of cost for the three position sensors

To summarize, inductive position sensors can optimize position accuracy by designing the coil substrate to match the motor used and have high environmental resistance along with reduced weight of motor equipment. In addition, a motor control system with position sensing function can be realized at a lower cost compared to other position sensors. As a result, the use of this sensor is expanding in applications that require high-precision position detection in harsh environments, such as industrial motors, robots and medical equipment.

Finally, the product page for RA6T2, a 32-bit Arm® Cortex® MCU for motor control, includes a wealth of application notes and sample projects for motor control with encoder IF, sensorless control, BLDC motor control with inductive position sensor (introduced in the blog), and more. It can be applied to a wide variety of motor control devices.

Experience superior performance in motor control with the RA6T2 32-bit MCU and evaluation environment that allows for immediate evaluation.

Share this news on

RA6T2 Evaluation Environment for BLDC Motor with Inductive Position Sensor IC

Downloads

Type Title Date
Software & Tools - Software Log in to Download ZIP 1.98 MB
1 item

News & Additional Resources