The HIP4086 and HIP4086A (referred to as the HIP4086/A) are 3-phase N-channel MOSFET drivers. Both parts are specifically targeted for PWM motor control. These drivers have flexible input protocol for driving every possible switch combination. The user can even override the shoot-through protection for switched reluctance applications. The HIP4086/A have a wide range of programmable dead times (0. 5μs to 4. 5μs) which makes them very suitable for the low frequencies (up to 100kHz) typically used for motor drives. The only difference between the HIP4086 and the HIP4086A is that the HIP4086A has the built-in charge pumps disabled. This is useful in applications that require very quiet EMI performance (the charge pumps operate at 10MHz). The advantage of the HIP4086 is that the built-in charge pumps allow indefinitely long on times for the high-side drivers. To insure that the high-side driver boot capacitors are fully charged prior to turning on, a programmable bootstrap refresh pulse is activated when VDD is first applied. When active, the refresh pulse turns on all three of the low-side bridge FETs while holding off the three high-side bridge FETs to charge the high-side boot capacitors. After the refresh pulse clears, normal operation begins. Another useful feature of the HIP4086/A is the programmable undervoltage set point. The set point range varies from 6. 6V to 8. 5V.

特性

  • Independently drives 6 N-channel MOSFETs in 3-phase bridge configuration
  • Bootstrap supply maximum voltage up to 95VDC with bias supply from 7V to 15V
  • 1.25A peak turn-off current
  • User programmable dead time (0.5μs to 4.5μs)
  • Bootstrap and optional charge pump maintain the high-side driver bias voltage.
  • Programmable bootstrap refresh time
  • Drives 1000pF load with typical rise time of 20ns and fall time of 10ns
  • Programmable undervoltage set point

应用

  • Brushless Motors (BLDC)
  • 3-phase AC motors
  • Switched reluctance motor drives
  • Battery powered vehicles
  • Battery powered tools

tune产品选择

器件号 Part Status Pkg. Type Carrier Type MOQ Buy Sample
Active SOICW Tube 300
Availability
Active SOICW Reel 1000
Availability
Active PDIP Tube 300
Availability

description文档

文档标题 language 类型 文档格式 文件大小 日期
数据手册与勘误表
star HIP4086, HIP4086A Datasheet 数据手册 PDF 863 KB
使用指南与说明
HIP4086DEMO1Z User's Manual 手册 - 开发工具 PDF 2.51 MB
HIP4086EVAL User Guide 指南 PDF 348 KB
应用指南 & 白皮书
Five Easy Steps to Create a Multi-Load Power Solution 白皮书 PDF 846 KB
How Green is Your Cloud? 白皮书 PDF 295 KB
AN1681: Grounding Techniques 应用文档 PDF 509 KB
AN1684: Nonideality of Ground 应用文档 PDF 397 KB
AN1116: CMOS Applications Information 应用文档 PDF 576 KB
PCN / PDN
PLC17007 - Q1 Cy 17 General Product Life Cycle Notice Product Life Cycle Notice PDF 292 KB
PCN16085 - Product Improvement - Design Change for the Listed Intersil HIP4086* Products 产品变更通告 PDF 809 KB
PCN12094 - Alternate Manufacturing Site for Assembly of the Listed Intersil Packaged Products - Amkor Technology, Philippines (ATP) 产品变更通告 PDF 98 KB
PCN12086 - Alternate Manufacturing Site for Assembly of the Listed Intersil PDIP Packaged Products -Amkor Technology, Philippines (ATP) 产品变更通告 PDF 86 KB
其他
TB458: Converting a Fixed PWM to an Adjustable PWM 其他 PDF 315 KB
TB406: Proper Termination of Inputs to the HIP408X Family of Driver ICs 其他 PDF 180 KB

file_download下载

文档标题 language 类型 文档格式 文件大小 日期
软件
HIP4086DEMO1Z PICmicro Firmware v2 ZIP 19 KB
Hardware
HIP4086DEMO1Z Design Files PCB设计文档 ZIP 379 KB

memory开发板与套件

器件号 文档标题 类型 Company
HIP4086DEMO1Z 3-Phase MOSFET Driver for BLDC Motors Demonstration Board 演示 Renesas