概要

説明

The F2480 is a 400MHz to 3000MHz RF Analog Variable Gain Amplifier (AVGA) that can be used in receivers, transmitters and other applications. Either the amplifier or voltage variable attenuator (VVA) can be configured as the first stage in the cascade. The F2480 RF AVGA provides 12dB typical maximum cascade gain (no attenuation) with 4.3dB noise figure (amplifier as first stage) and 36dB gain adjustment designed to operate with a single +5V supply.  Nominally, the Zero-Distortion™ amplifier offers +41.5dBm output IP3 using 106mA of ICC. This device is packaged in a 5 x 5 mm, 32-TQFN with 50Ω single-ended RF input and RF output impedances for ease of integration into the signal-path lineup.

特長

  • 400MHz to 3000MHz (amplifier range)
  • 50MHz to 6000MHz (attenuator range)
  • 12dB typical cascaded max gain
  • 36dB continuous gain range
  • Excellent linearity +41.5dBm OIP3
  • Noise figure 4.3dB
  • ICC = 106mA, 1.2mA amplifier standby current 
  • Bi-directional attenuator RF ports
  • Positive amplifier gain slope vs. frequency to counteract system PCB loss
  • VMODE pin allows either positive or negative attenuation control response
  • Linear-in-dB attenuation characteristic 
  • 4 RF port pinout supporting multiple lineup configurations
  • 50Ω input and output impedances
  • Broadband, internally matched
  • 5 x 5 mm, 32-TQFN package

製品比較

アプリケーション

ドキュメント

分類 タイトル 日付
データシート PDF 4.06 MB
ガイド PDF 2.24 MB
ガイド PDF 2.83 MB
概要 PDF 1.15 MB
製品変更通知 PDF 30 KB
製品概要 PDF 382 KB
6 items

設計・開発

ソフトウェア/ツール

ソフトウェアダウンロード

分類 タイトル 日付
ソフトウェア/ツール-ソフトウェア ログインしてダウンロード ZIP 169.81 MB
1 item

ボード&キット

ボード&キット

モデル

Constant Linearity (KLIN) RF Technology by IDT

IDT’s KLIN (constant linearity) RF technology extends both OIP3 and output 1 dB compression point (P1dBO) amplifier gain settings. This is particularly valuable in transmitter designs where the gain of the device is maintained within a normal gain setting window about 6 dB below maximum gain. 

KLIN refers to Constant High Linearity Inner Amplifiers as the gain is adjusted. This technology extends the compression performance over a wide range of input powers, and also extends output third order intercept and corresponding inner modulation distortion performance over a wide range of output powers.

This technology is particularly advantageous in transmitter designs, where the gain of the device is maintained within a normal gain setting window.

This technology applies to some of IDT's high-gain, high-linearity transmitter variable gain amplifiers (VGAs). For more information, visit: http://www.idt.com/products/rf-products/variable-gain-amplifiers-vga.