The ISL9113 provides a power supply solution for devices powered by three-cell alkaline, NiCd, NiMH or one-cell Li-Ion/Li-Polymer batteries. It offers either a fixed 5V or an adjustable output option for USB-OTG or portable HDMI applications. The device is guaranteed to supply 500mA from a 3V input and 5V output and has a typical 1.3A peak current limit. High 1.8MHz switching frequency allows for the use of tiny, low-profile inductors and ceramic capacitors to minimize the size of the overall solution.

The ISL9113 is an internally compensated, fully integrated synchronous converter optimized for efficiency with minimal external components. At light load, the device enters skip mode and consumes only 20μA of quiescent current, resulting in higher efficiency at light loads and maximum battery life. The device is available in an 8 Ld DFN package and a 6 bump WLCSP.


  • Up to 95% efficiency at typical operating conditions
  • Input voltage range: 0.8V to 4.7V
  • Output current: Up to 500mA (VBAT = 3.0V, VOUT = 5.0V)
  • Low quiescent current: 20μA (typical)
  • Logic control shutdown (IQ < 1μA)
  • Fixed 5V, 5.1V or adjustable output
  • 1.2V EN high logic
  • Output disconnect during shutdown
  • Skip mode under light load condition
  • Undervoltage lockout
  • Fault protection: OVP (ADJ version only), OTP, short circuit
  • 8 Ld 2mmx2mm DFN package and 6 bump 0.8mmx1.36mm WLCSP


  • Products including portable HDMI and USB-OTG
  • Smartphones
  • Tablet and mobile internet devices


タイトル language 分類 形式 サイズ 日付
star ISL9113 Datasheet データシート PDF 1.04 MB
Five Easy Steps to Create a Multi-Load Power Solution ホワイトペーパー PDF 846 KB
AN9208: High Frequency Power Converters アプリケーションノート PDF 592 KB
AN1681: Grounding Techniques アプリケーションノート PDF 509 KB
AN1684: Nonideality of Ground アプリケーションノート PDF 397 KB


製品名 タイトル 分類 会社名
ISL9113ER7Z-EVZ Synchronous Boost Converter with 1.3A Switch Evaluation Board Evaluation Renesas
ISL9113ERAZ-EVZ Synchronous Boost Converter with 1.3A Switch Evaluation Board Evaluation Renesas