Overview

Description

The IDT8N0Q001 is a Quad-Frequency Programmable Clock Oscillator with very flexible frequency programming capabilities. The device uses IDT’s fourth generation FemtoClock®NG technology for an optimum of high clock frequency and low phase noise performance. The device accepts 2.5V o r3.3V supply and is packaged in a small, lead-free (RoHS6) 10-lead ceramic 5mm x 7mm x 1.55mm package.
 
Besides the 4 default power-up frequencies set by the FSEL0 and FSEL1 pins, the IDT8N0Q001 can be programmed via the I2C interface to output clock frequencies between 15.476 to 260MHz to a very high degree of precision with a frequency step size of 435.9Hz÷N(N:PLLpostdivider). Since the FSEL0 and FSEL1 pins are mapped to4 independent PLL M and N divider registers (P,MINT,MFRACandN), reprogramming those registers to other frequencies under control of FSEL0 and FSEL1 is supported. The extended temperature range supports wireless infrastructure, telecommunication and networking end equipment requirements.

Features

  • Fourth generation FemtoClock® NG technology
  • Programmable clock output frequency from
    15.476MHz to 260MHz
  • Four power-up default frequencies (see part number order codes),
    re-programmable by I2C
  • I2C programming interface for the output clock frequency and
    internal PLL control registers
  • Frequency programming resolution is 435.9Hz ÷ N
  • One 2.5V, 3.3V LVCMOS clock output
  • Two control inputs for the power-up default frequency
  • LVCMOS/LVTTL compatible control inputs
  • RMS phase jitter @ 156.25MHz (12kHz - 20MHz):
    0.250ps (typical)
  • RMS phase jitter @ 156.25MHz (1kHz - 40MHz):
    0.290ps (typical)
  • 2.5V or 3.3V supply
  • -40°C to 85°C ambient operating temperature
  • Available in Lead-free (RoHS 6) package

Comparison

Applications

Documentation

Type Title Date
Datasheet PDF 707 KB
Overview PDF 526 KB
Manual - Hardware PDF 182 KB
Product Brief PDF 6.57 MB
Manual - Development Tools PDF 693 KB
5 items

Design & Development

Models