Overview
Description
The Renesas RYZ014A module is an all-in-one, single-mode LTE category M1 module with worldwide deployment and roaming capability. The module comprises an LTE Cat-M1 platform and all other elements necessary for a complete LTE Cat-M1 modem system. These include an LTE-optimized transceiver, a single complete RF front-end to support LTE Cat-M1 bands worldwide, and key interfaces, all in a single compact LGA package. The RYZ014A module also includes a carrier-proven LTE Cat-M1 protocol stack and comprehensive software.
Features
- Integrated cellular IoT module for LTE Cat-M1
- 3GPP Release 13
- Field-proven LTE Cat-M1 software stack
- AT command interface
- 20.25 x 21.35mm LGA package with 108 pads
- uSIM Interface
- Voltage 3.1V to 4.5V
- RoHS-compliant, halogen-free
- High output power supporting both power class options 20 and 23dBm
Comparison
Applications
Design & Development
Software & Tools
Sample Code
Sample Code
Filters
|
||
|---|---|---|
| Type | Title | Date Date |
| Sample Code |
[Software=FSP | v4.2.0],[Toolchain: GCC ARM Embedded Toolchain version 10.3.1.20210824]
ZIP
12.71 MB
Compiler:
GNUARM-None
IDE:
e2 studio
|
|
| Sample Code |
[Software=FSP | v4.2.0],[Toolchain: GCC ARM Embedded Toolchain version 10.3.1.20210824]
ZIP
12.73 MB
Compiler:
GNUARM-None
IDE:
e2 studio
|
|
| Sample Code |
[Software=RX Driver Package|V1.36],[Toolchains=CC-RX|V3.04.00]
ZIP
20.82 MB
Application:
Consumer Electronics, Industrial
Compiler:
CC-RX
Function:
Communication Interface
IDE:
e2 studio
|
|
| Sample Code | ZIP 1.04 MB 日本語 | |
| Sample Code | ZIP 1.46 MB | |
5 items
|
||
Boards & Kits
Models
ECAD Models
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on the CAD Model links in the Product Options table. If a symbol or model isn't available, it can be requested directly from SamacSys.
Support
Support Communities
Get quick technical support online from Renesas Engineering Community technical staff.
Support Communities
-
RYZ014A - NB-IoT
Hello Renesas team, We were exploring to use RYZ014A for NB-IoT communication. Can this be done with RYZ014A? If so, what could be the minimum MCU variant that can be interfaced with RYZ014A? RL,RX, RA, etc... Regards, Kamal
Jul 19, 2021 -
LTE Cat-M1 (RYZ014A)
Hi, My question is about which telecommunication infrastructure supports the above Is the above supported by any telco offering 4G LTE network? Most telco does not specifically mention that they support IoT infrastructure (ie. NB-IoT, or LTE Cat-M1)
Jul 26, 2021 -
Where is CK-RA6M5 "Quick Start Example Project"?
According to CK-RA6M5 with RYZ014A Pmod Quick Strart Guide, Rev. 1.01, the example project is "available in the Downloads tab of CK-RA6M5 webpage atrenesas.com/ra/ck-ra6m5". But there is no Downloads tab. Anywhere else on this page, I don't find the sources ...
Sep 30, 2022
FAQs
-
RYZ014A: Module Certifications
The RYZ014A cellular IoT module has been tested for RF compliance with FCC (for US market), CE (for Europe) and Telec (for Japan). Additional regional certifications can be addressed based on this quite easily. Additionally, the RYZ014A has the official stamps of approval from PTCRB and GCF which are proving ...
May 26, 2021 -
Using the RYZ014A EVK with Renesas RA MCUs
... wires to the needed level converter interface board. The included example project targets the EK-RA6M4 kit and uses FSP 3.1.0.The full RYZ014A EVK includes two boards- a Modem board, which houses the RYZ014A device, and a Raspberry Pi board which controls the Modem board. The Raspberry ...
Jun 29, 2021 -
RYZ014A: Reduced development time and cost
In the product development phase, the effort for the design of the hardware and the implementation of software is much lower using the RYZ014A versus a chipset as the module already is a qualified RF design and includes a field-proven LTE software stack. In the product production phase, using ...
May 26, 2021
News & Blog Posts
News
May 26, 2021
|
Blog Post
May 26, 2021
|