RX200 entry-level microcontroller with minimum number of peripherals
The RX220 Group of products is the slimmed-down version of the higher model RX210 Group, and has very high compatibilility in terms of pin arrangement and on the software level.
|CPU core||RX CPU
General registers: 32-bit x 16 Multiplier: 32-bit multiplier
Multiply-accumulator: Yes (two types: memory-to-memory operations and register-to-register operations)
|Maximum operating frequency||32MHz|
|Power supply voltage||1.62 to 5.5V|
|Program Flash||max. 256 KB|
|Data Flash||8 KB|
|SRAM||max. 16 KB|
|On-chip peripheral functions||Transfer functions||DMA controller (DMACA): 4 channels
Data transfer controller (DTCa)
|Timers||Multi-function timer pulse unit 2: 16 bits x 6 channels (MTU2a)
Port output enable 2 (POE2a) 8-bit timer (TMR): 8 bits x 2 channels x 2 units
Compare match timer (CMT): 16 bits x 2 channels x 2 units
Real-time clock (RTCb): Except 48-pin
|Communication functions||Serial communications interface (SCIc): 64-pin and over: 4 channels; Under 48-pin: 3 channels
Serial communications interface (SCId): 1channel
I2C bus interface (RIIC): 1channel
Serial peripheral interface (RSPI): 1channel
|Analog functions||12-bit A/D converter (S12ADb): 100-pin: 16 channels; 64-pin: 12 channels; 48-pin: 8 channels
Comparator A (CMPA): 2 channels
|Safety functions||Clock frequency accuracy measurement circuit (CAC)
Data operation circuit (DOC) 14-bit independent watchdog timer (IWDTa)
ADC self-diagnostic function/AD disconnection-detection function
CRC calculator (CRC)
|Clock Generation Circuit||Main clock oscillator
Low-speed on-chip oscillator (LOCO)
High-speed on-chip oscillator (HOCO)
Dedicated on-chip oscillator for the IWDT
|Others||Event link controller (ELC)
Multifunction pin controller (MPC)
Power-on reset circuit (POR)
Low voltage detection circuit (LVD)
|On-chip debugging function||Planning|
|Low power consumption modes||3 modes
All-module clock stop mode
Software standby mode
|Packages||PLQP0048KB-A (48-pin LFQFP,7ｘ7mm,0.5mm pitch)
PLQP0064KB-A (64-pin LFQFP,10ｘ10mm,0.5mm pitch)
PLQP0100KB-A (100-pin LFQFP,14x14mm,0.5mm pitch)
Pin Count / Memory Size Lineup:
Below you will find information to support the development of your application.
You can find an explanation of orderable part numbers here.
Resources for Software and Hardware
|My Renesas||Create a My Renesas account to use our tool download services, receive e-newsletter/update notifications, and take advantage of our other services.|
|e-learning||Information for studying and learning about microcontrollers and microprocessors.|
|FAQ||Frequently asked questions and useful hints for development.|
|Forum||A forum and community site to share technical information, questions and opinions with others who use Renesas products.|
|Video||Watch videos related to this product.|
Software Design Support
|CS+||An integrated development environment that can be used for coding, assembling/compiling, and simulation. (Also included with Renesas Starter Kits.)|
|e2 studio||Renesas eclipse embedded studio, known as e² studio, is a complete development and debug environment based on the popular Eclipse CDT project.|
|E1||A standard Renesas on-chip debugging emulator that enables users to carry out ample debugging for real development at low cost. (Also included with starter kits.)|
|Renesas Starter Kit||All the development tools you need for MCU evaluation and getting started. Also recommended for training.|
Hardware Design Support
|IBIS/BSDL||IBIS standard simulation data is required for high-speed board design and can be used to run simulations to examine and troubleshoot issues such as waveform reflection, ringing, and so on, before producing the actual board.
BSDL is a data input format supported by most IEEE 1149.1 (JTAG)-compliant tools. The automatic test pattern generation (ATPG) and automatic test equipment functions of these tools facilitate testing.
Please search for your resonator on its manufacturer's site linked below. If you require optimal oscillation circuit constants for your particular system, please ask the manufacturer of the oscillator.
For Main clock resonator :
Murata Manufacturing: For IC Manufacturer, select Renesas Electronics, and enter R5F5220 into the IC Part Number search box.
For Sub clock resonator :
The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.
Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.