Connects and controls Bluetooth® Low Energy (BLE) sensors through an IoT gateway to an Amazon Web Service MQTT broker with a mobile app.
A Synergy SK-S7G2 IoT gateway is used to simulate a smart home environment and connects through a Wi-Fi access point to an Amazon Web Service (AWS) MQ Telemetry Transport (MQTT) broker via MQTT protocol. BLE sensors can be monitored and controlled with a MQTT Dash broker app on a smartphone or mobile device. The gateway sends data collected from BLE sensors and receives control commands back from the broker. Initial provisioning of the gateway is performed using the access point mode and a simple web server hosted on the gateway.
Copyright 2017 Clarinox Technologies Pty Ltd. All Rights Reserved.
The content included herein has been provided by other companies and Renesas does not claim any ownership therein. Renesas may or may not moderate or pre-screen the content included herein. Renesas requires partners to verify the functionality of their products on Synergy Platform and Renesas is not responsible in any way for the content included herein nor its quality. Renesas does not endorse any content included herein or any opinion, recommendation, or advice expressed therein, and Renesas expressly disclaims any and all liability in connection with such content, whether or not arising under the laws of copyright, libel, privacy, obscenity, or otherwise. Renesas does not provide support for any of this content; all support requirements should be directed to the owner or licensor of the content. Renesas retains the right, at its sole discretion and without prior notice, to pre-screen, refuse, or remove any content from the Synergy Platform.
This application has the following hardware requirements:
- Renesas Synergy SK-S7G2 kit
- Clarinox Joeyduino Shield Wireless module
- Smart Phone or mobile device
- Bluetooth Low Energy Sensor Tag by Texas Instruments (Optional)
Installation instructions are included in the application project guide.