ISL70244SEH

19MHz Radiation Hardened 40V Dual Rail-to-Rail Input-Output, Low-Power Operational Amplifier

Product Status: Mass Production

OVERVIEW

The ISL70244SEH features two low-power amplifiers optimized to provide maximum dynamic range. These op amps feature a unique combination of rail-to-rail operation on the input and output as well as a slew enhanced front end that provides ultra fast slew rates positively proportional to a given step size; thereby increasing accuracy under transient conditions, whether it’s periodic or momentary. They also offer low power, low offset voltage, and low temperature drift, making it ideal for applications requiring both high DC accuracy and AC performance. With <5μs recovery for Single Event Transients (SET) (LETTH = 86.4MeV•cm2 /mg), the number of filtering components needed is drastically reduced. The ISL70244SEH is also immune to single-event latch-up because it is fabricated in the Renesas proprietary PR40 Silicon On Insulator (SOI) process.

The amplifiers are designed to operate over a single supply range of 2.7V to 40V or a split supply voltage range of ±1.35V to ±20V. Applications for these amplifiers include precision instrumentation, data acquisition, precision power supply controls, and process controls.

The ISL70244SEH is available in a 10 Ld hermetic ceramic flatpack that operates across the temperature range of -55°C to +125°C.

KEY FEATURES

  • Electrically screened to DLA SMD# 5962-13248
  • Acceptance tested to 50krad(Si) (LDR) wafer-by-wafer
  • <5µs recovery from SET (LETTH = 86.4MeV•cm2/mg)
  • Unity gain stable
  • Rail-to-rail input and output
  • Wide gain bandwidth product 19MHz
  • Wide single and dual supply range 2.7V to 40V maximum
  • Low input offset voltage 400µV (+25°C, maximum)
  • Low current consumption (per amplifier) 1.2mA, typical
  • No phase reversal with input overdrive
  • Slew rate
    • Large signal 60V/µs
  • Operating temperature range -55°C to +125°C
  • ISL70244SEH radiation acceptance (see TID report)
    • High dose rate (50-300rad(Si)/s) 300krad(Si)
    • Low dose rate (0.01rad(Si)/s) 50krad(Si)
  • SEE hardness (see SEE report for details)
    • SEL/SEB LETTH (VS = ±19V) 86.4MeV•cm2/mg
  •  

     

    APPLICATIONS

  • Precision instruments
  • Active filter blocks
  • Data acquisition
  • Power supply control
  • Process control

BLOCK DIAGRAM

 Block Diagram

PARAMETRICS

Parameters
ISL70244SEH
Basic Information
生产状态
Mass Production
器件/通道数量
2
带宽 (MHz)
19
压摆率 (V/μs)
60
VS (最小值)
2.7 V
VS (最大值)
40 V
IS (每放大器)
1.2 mA
噪声VN (nV/√Hz)
12.3
IBIAS (最大值)
650 nA
最大失调电压
500 µV
低剂量率 (HDR) krad (Si)
50
资质级别
QML Class V (space)
高剂量率 (HDR) krad (Si)
300
DLA SMD
5962-13248
IOUT
8 mA
轨到轨输入
Yes
轨到轨输出
Yes
PSRR (dB)
123
种类
V, /PROTO
CMRR (dB)
92
SMD URL
AVOL (dB)
118
SEL (MeV/mg/cm2)
86.4
温度范围
-55 to +125

Action Needed