E2 emulator Lite [RTE0T0002LKCE00000R]
Overview
The E2 emulator Lite (abbreviated as "E2 Lite") is an on-chip debugging emulator and flash programmer for MCUs of the RX and RL78 families. The E2 Lite is more economical than the E1, and is suitable for work across the whole range from hobbyist projects and education to professional development.
Topics
The E2 emulator newly supports the RE01_256KB group. Learn more >>
Release Information
| Purpose of use | Software to be used | Target devices | Latest Version | Released | Operating Environment |
|---|---|---|---|---|---|
| On-chip Debugging | CS+ *Evaluation Software Download |
RX, RL78 [More details] List of Functions Supported by CS+ |
V8.04.00 | Jul. 20, 2020 | Operating Environment |
| e² studio *Download |
RA, RE, RX, RL78 [More details] *See "Release notes". |
(64-bit version) 2020-07 |
Jul. 20, 2020 | ||
| (32-bit version) V7.8.0 |
Apr. 20, 2020 | ||||
| IAR Embedded Workbench Note1 | RX, RL78 | Contact IAR Systems. | |||
| Flash Programming | Renesas Flash Programmer V3 *Evaluation Software Download |
RA, RX, RL78 [More details] List of MCUs supported by Renesas Flash Programmer
|
V3.06.02 | Jul. 20, 2020 | Operating Environment |
Note:
- As for tools produced by partners, Contact each company directly.
Specifications
Note that some functions shown here may not be supported under the IDE you use. Performance property and Connection system also vary depending on the MCU type.
|
See On-chip Debuggers Performance Property. |
|---|---|
| On-board programming | Supported Note1 |
| User interface | 14pin 2.54mm pitch connector (7614-6002: from 3M Japan, 2514-6002：from 3M Limited) 20pin 1.27mm pitch connector (FTSH-110-01-L-DV-K： from Samtec) 10pin 1.27mm pitch connector (FTSH-105-01-L-DV-K：from Samtec) |
| PC Interface | USB 2.0, full speed |
| Target board connection | Via attached user I/F cable (Connection signals vary by the target MCU type.) |
| Power supply | Up to 200mA (3.3V) |
| Power voltage | 1.8V to 5.5V (depending on the target MCU) |
| External dimension (Except the protruding parts) |
96.2 mm×52.7 mm×17.2 mm |
| Conformance with overseas standards | European Standards: EN 55022 Class A, EN 55024 US FCC Standard: FCC part 15 Class A |
Note:
- The E2 emulator Lite can support bit rates up to 1.5 Mbps. However, only bit rates which are selectable for the external clock of the target MCU or system of the RX family are displayed. Note that in some cases the bit rate selected for the E1 or E20 emulator will not be selectable.
Components
- E2 emulator Lite main unit
- USB I/F cable
- User's I/F cable (14-pin)
Optional Products
Following optional products are provided to facilitate the use of the E2 emulator Lite. Please make sure to choose the products that match MCUs you use.
Note: Please read references to "E1 emulator" in the manuals for optional products as also meaning "E2 emulator Lite"
| MCUs | ||
|---|---|---|
| RX | RL78 | |
| User-system Interface Cable for the E2 Emulator (20-20 pins) RTE0T00020KCAC0000J |
||
| User-system Interface Cable for the E2 Emulator (20-10 pins) RTE0T00020KCAC1000J |
||
Available | — Not Available
| MCUs | ||
|---|---|---|
| RX | RL78 | |
| 14-Pin to 38-Pin Conversion Adapter for the E1 Emulator R0E000010CKZ00 An adapter for converting the 14-pin/2.54-mm pitch connector on the head of the emulator user interface cable to a 38-pin/0.5-mm pitch connector |
— |
|
| Small Connector Conversion Adapter for the E1 Emulator R0E000010CKZ11 An adapter for converting the 14-pin/2.54-mm pitch connector on the head of the emulator user interface cable to a 14-pin/1.27-mm pitch connector |
||
Available | — Not Available
| MCUs | ||
|---|---|---|
| RX | RL78 | |
| Hot-plug Adapter for the E1 Emulator R0E000010ACB00 An adapter that allows connection of an emulator to a running user system without turning the power off |
Note1 | Note1 |
Available | — Not Available
Note:
- Refer to On-chip Debuggers Performance Property for the applicable MCU groups.
| MCUs | ||
|---|---|---|
| RX | RL78 | |
| Isolator for the E1 Emulator R0E000010ACB10 (For the RX or the R8C family) |
— |
|
| Isolator for the E1 Emulator R0E000010ACB20 (For the RL78 or the RH850 family) |
— |
|
Available | — Not Available
| MCUs | |
|---|---|
| RL78/G10 | |
| Low voltage OCD Board for RL78/G10 (10-pin/16-pin) R0E510Y47LVB00 An OCD board for debugging an RL78/G10 MCU (10-pin or 16-pin) with an adapter voltage below 4.5 V |
Available | — Not Available
Target Devices
As the supported devices are different depending on the software you use, refer to the "Target devices" in Release information.
Information Supporting Development Tools
| Title | Description |
|---|---|
| My Renesas | Create a My Renesas account to use our tool download services, receive e-newsletter/update notifications, and take advantage of our other services. |
| e-learning | Information for studying and learning about microcontrollers and microprocessors. |
| FAQ | Frequently asked questions and useful hints for development. |
| Forum | A forum and community site to share technical information, questions and opinions with others who use Renesas MCU's. |
| Tool News | Tool release information and other important information. |
| Operating Environment | Information on system requirements and operating environment for the latest version of tools. |
| Tool Environmental Information | Information on RoHS compliance of tools. |
| Info on Discontinued Products | A list of Renesas software and tools that have been discontinued and are no longer being offered for new projects. |
Comparison between E2 emulator Lite and E1 emulator
Debugging and programming functions
| Functions | E2 emulator Lite | E1 emulator | |
|---|---|---|---|
| Software Break | Supported | ||
| Hardware Break | Detecting an execution address | Supported | |
| Detecting a data access | Supported | ||
| Memory reference & change while executing program | Supported | ||
| MCU internal trace | Supported | ||
| Time measurement | Supported | ||
| Performance measurement | Supported *Except the RL78 and RX100 families | ||
| On-board programming | Supported Note1 | ||
Note:
- The E2 emulator Lite can support bit rates up to 1.5 Mbps However, only bit rates which are selectable for the external clock of the target MCU or system of the RX family are displayed. Note that in some cases the bit rate selected for the E1 or E20 emulator will not be selectable.
Hardware specifications
| Specifications | E2 emulator Lite | E1 emulator | |
|---|---|---|---|
| PC Interface | USB 2.0 (full speed) | USB 2.0 (full speed /high speed) |
|
| MCUs | RL78, RX | RL78, RX, RH, R8C, 78K, V850 | |
| User interface | Connector | 14pin, 2.54mm Pitch | |
| Cable | 14pin Cable(accessory) | ||
| Communication interface (RX) | FINE(1.5Mbps） JTAG(MAX 6MHz） SCI |
FINE(2.0Mbps） JTAG(MAX 16.5MHz） SCI |
|
| Communication interface (RL) | TOOL0(1.0Mbps） | ||
| Availability at different potential by EVDD≦VDD(RL78) | Enabled at the same potential as EVDD=VDD | Enabled at the different potential by EVDD≦VDD | |
| Power voltage for the emulator | USB-bus power supply (VBUS 4.5V, min / 500mA, min） |
||
| Power voltage from the emulator | 3.3V Max:200mA |
3.3V, 5.0V(VBUS) Max:200mA |
|
| Correspondence user system voltage | 1.8 to 5.5V | ||
| Self-Check function | Not supported | Supported | |
可订购工具信息
| 可订购部件编号 | 生产状态 | 厂商 | 建议单工具价格 |
SPQ
|
描述 | 分销商库存 | 分销商 | 分销商采购 | Buy Direct |
|---|---|---|---|---|---|---|---|---|---|
| RTE0T0002LKCE00000R | Mass Production | Renesas | call | 1 | E2 emulator Lite [RTE0T0002LKCE00000R] | 14 | Digi-Key | - | |
| 211 | RS Components | ||||||||
| 122 | element14 APAC |
注意事项 ：分销商价格可能会与所述预算价格有所不同。本网站上的定价与供货信息由瑞萨电子授权分销商提供的信息而定，如有更改恕不另行通知。通过在本页面上选择一位分销商，您将会从瑞萨电子网站跳转至分销商网站来完成购买。分销商的运营完全独立于瑞萨电子，有其自身的销售条款和条件。对于分销商与最终客户之间的交易，瑞萨电子不承担任何明示或暗示的陈述与担保责任。